Articles


PHMSA Panel Meeting Next Week on Integrity Management Rule

The proposed Safety of Gas Transmission and Gathering Pipelines rule would set new IM requirements for these pipelines that are not in high consequence areas (HCAs), and it proposes a new "moderate consequence areas" definition.

Canada Renews Western Waste Management Facility Operating License

The renewed license authorizes construction of new facilities, including storage buildings for low- and intermediate-level waste, in‑ground storage containers for intermediate-level waste, in-ground containers for heat exchangers, and storage buildings for used dry nuclear fuel.

OSHA Finds Safety Failures in Fatal Incident Investigation

OSHA has issued a dozen fines following the investigation into a Pensacola-area electric cable manufacturer.

Look for a gas detection vendor that supports communication across the gas detection fleet, spanning personal and area monitors. (Industrial Scientific Corporation photo)

OnStar for Your Gas Detection Program

How are organizations leveraging historical and real-time data to keep workers safe? As with auto safety systems and services, one type of data isn't enough for your gas detection program.

One of the easiest ways to monitor safety metrics is by using a safety management software. As you improve your safety performance analysis, you’ll need a system that can handle the influx of data, give you access to real-time metrics, and help you glean valuable insights hidden within the flood of information.

Why Do Safety Inspections?

Work site safety inspections can be a vital part of your injury prevention efforts if done well.

Welcome Changes for ASSE

Look for the rebrand to start rolling out in the first quarter of 2018 with a refreshed website.

"If a bystander is not trained in CPR, then the bystander should provide hands-only CPR. The rescuer should continue hands-only CPR until an automated external defibrillator arrives and is ready for use or EMS providers take over care of the victim."

Encouraging Hands-Only CPR

A study published in Circulation last year found that CPR knowledge and confidence to use hands-only CPR can be increased through large-scale community training.

Administrative controls and warnings are less effective because they rely on workers following proper procedures and safe work practices. (Schneider Electric photo)

The Importance of Arc Flash Mitigation

De-energizing equipment does not absolve the facility from the responsibility of performing an arc flash analysis or providing the necessary PPE.



Proper hand washing is key for infection control.

Safer Soap: A Look at Harmful Ingredients Found in Hand Cleansers

According to the Centers for Disease Control and Prevention, up to 40 percent of workers will suffer from occupational dermatitis at some point in their working lives.

Why Leadership Development Efforts Will Continue to Fail

Profile your desired leader. What would you see them doing or hear them saying that indicates they are in the right position and a change-agent?

Imagine the outcome if elements of consequential leadership made its way into a leadership environment where there is an unwavering commitment to safety excellence. (Make My Day Strategies LLC photo)

Help the 'Bulletproof' Employee Make the Connection

Inspire conformance through influence, awareness, and definitively through the identification of the harmful and helpful biases we all have, some of them buried deep within us.

Hazmat employees should be aware of emergency action plans, spill response procedures, fire prevention plans, and any other procedures that are in place to help prevent injury while preparing or transporting a hazardous material.

Key Requirements for Employees Transporting Hazmats

Like OSHA and EPA chemical safety trainings, DOT training helps hazmat employees to recognize and identify hazardous materials and learn how their functions ensure that those materials can be transported safely.

Be Ready for Hurricane Season, Authorities Advise Coastal Residents

The Florida Department of Health already has warned Floridians to be ready and says every hurricane season should be treated as a serious threat.

All employers, employees, and contractors within all three segments of the oil and gas industry (upstream, midstream, and downstream) are responsible for ensuring safe and healthful work sites.

The Significance of API RP 2219 Recommendations in the BLSR Accident, Part II

Employers and workers need to pay special attention to minimum recommended safety requirements of approved standards and safe working procedures.

Eye protection is vital to safeguard your eyes and maintain healthy vision across a wide variety of jobs. (3M Personal Safety Division photo)

How Protective Eyewear Has Changed Dramatically Over the Decades

Today's safety eyewear can be so lightweight and comfortable that at times workers don't even notice they are wearing it once it's on.

After an individual renews his eyewear prescription, there are other ways to help reduce CVS. Specialty lenses are now developed to aid the computer user.

Safety Eyewear for Computer Vision Syndrome

Computer work is more visually demanding than any other type of office work.

Flash fires and fuel-fed fires are two different hazards, and it

Eight Things Oil & Gas Workers Should Know About Flash Fires

Flash fires and fuel-fed fires are two different hazards, and it's critical to distinguish between the two for various safety reasons.

This is not just the path toward improved safety and lower safety-related costs; it is also the path to walk if your goal is greater customer retention, higher sales, and maximizing profits.

Safety Totally Leads the Way

This is not just the path toward improved safety and lower safety-related costs; it is also the path to walk if your goal is greater customer retention, higher sales, and maximizing profits.

The old standard had five ratings, but the new version nearly doubled it with a new scale of A1-A9. The change adds high-end levels, reflecting the influx of high-performance cut-resistant gloves in the marketplace. (Ansell photo)

ANSI/ISEA 105-2016 Regulation Updates

We're better equipped than ever before to provide hand protection to industrial workers. The biggest challenge is making sure regulations and standards around PPE and hand protection keep pace.

"The Colorado Convention Center is a great venue," said Dan McNeill, director of professional development at ASSE. "We

ASSE's Mile High Moment

This could be the most consequential annual conference for the society in many years.

Product Showcase

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

Featured

Artificial Intelligence