Articles


The hazmat rules are constantly under construction, with a new requirement or restriction always on the horizon. (Lion Technology Inc. photo)

Is America's Hazmat in Good Hands?

Yes, for now. But the world will need a new crop of dedicated dangerous goods professionals to ensure hazmat reaches its destination, safely and on time.

Ejection Seat Manufacturer Fined $1.4 Million in Red Arrows Pilot's Death

An investigation by the Health and Safety Executive concluded a mechanical fault led to the failure of the parachute deployment mechanism designed to bring the 35-year-old pilot to ground safely, and this resulted in the main parachute failing to deploy.

NIOSH's Pocket Guide Turns 40

Improving the NPG will be helpful to all of us.

Preparing for Automated Driving Systems

Weighty questions about the technologies include how the current standard for stability control testing can be amended for ADS vehicles that have no steering wheel.

Safe Sounding Workplaces

Using sound mapping software rather than measurements means you can predict future noise levels and take pre-emptive steps to control the noise.

Fatal Fall Brings $40,096 Fine

OSHA investigated the company after an employee installing patio screen enclosures died from a fall. L.I. Aluminum was issued four serious citations for failing to provide fall protection to employees working at heights of 10 feet or more; exposing employees to falls; and failing to train employees on fall hazards and the proper use of ladders.

Lockout leadership can be the missing link that drives continuous improvement leading to meaningful change in the safety culture of the adapting workplace. (The Master Lock Company photo)

Lockout Leadership as a Path to Advancing the Practice

It is much more effective to share with workers the ways and means the company has decided to do things, rather than let impersonal government regulations drive critical behaviors.

Even if employees do remember all of the layers of protective equipment they need, the inconvenience of having to put on and take off multiple items may deter them from wearing all of the necessary PPE. (Workrite Uniform Company photo)

PPE Tips for Encouraging Wearer Compliance

The best way to prevent costly injuries is to promote safe work practices, provide the necessary PPE, and do everything possible to encourage wearer compliance.



New fiberglass materials are available and can reduce the weight of your ladder by 20 percent. Most ladder companies now offer a lighter-weight version of some ladders. (Little Giant Ladder Systems photo)

Ladders—A Need for Change

The safest way to design a product is to design out the dangers. If it’s impossible to design out all of the dangers, then you guard against those dangers.

Top-Line Concerns

Head and face hazards are a constant for workers in construction, waste management, and in some manufacturing settings.

Driverless Vehicle Testing, Use OK in California

"This is a major step forward for autonomous technology in California," DMV Director Jean Shiomoto said. "Safety is our top concern, and we are ready to begin working with manufacturers that are prepared to test fully driverless vehicles in California."

Cascading Effects: Preventing Addiction with Safety

What we as leaders do and don't can go well beyond just affecting organizational members' work life; it can also impact their personal lives.

HVLS fans are gaining recognition as an efficient way of improving air movement, reducing heat stress, lowering energy costs, and creating a better overall environment. (Rite-Hite photo)

Reducing Heat Stress with HVLS Fans and Dock Seals

Dock equipment keeps conditioned air inside. HVLS fans circulate air to boost employee comfort, safety, and efficiency.

Comfort differs greatly from person to person, making it a poor benchmark to judge garment suitability. It should not be the sole determining factor. (Westex by Milliken photo)

Exploring Measures to Protect Your Employees from Heat Stress

There are a number of ways to guard against heat stress, and those can be divided into preventative measures, protective measures, and proper attire.

Anybody can choose to go above and beyond what OSHA requires. In this case, going above and beyond could reduce the chance that something is done incorrectly.

Do You Really Need a 5,000-Pound Anchor Point to Satisfy OSHA?

You may be eliminating perfectly good anchor points where it’s already difficult to achieve proper fall protection.

Defining Safety Excellence: What Does Great Look Like?

If it isn't clear to executive leadership what it would look like when successful, expect misalignment throughout the rest of the organization.

Energy Inspector General Faults Beryllium Controls at Los Alamos National Laboratory

The IG's Feb. 20 report concluded LANL did not fully implement an effective Prevention Program as required, did not complete hazard assessments with sampling plans for each record in its 2016 beryllium inventory, and released potentially contaminated areas for other use without a formal evaluation to ensure any residual contamination was within acceptable limits.

Red Light Enforcement Funds Going to 35 Pennsylvania Cities

The state's Automated Red Light Enforcement program works to improve safety at signalized intersections by providing automated enforcement at locations where data shows red light running has been a problem. Total funding since 2010 has reached $62.87 million for 366 safety projects.

GAO Report Identifies Challenges to Counterfeit and IP Enforcement

"The risks associated with the types of counterfeit goods we purchased can extend beyond the infringement of a company's intellectual property rights," the report says. "For example, a UL investigation of counterfeit iPhone adapters found a 99 percent failure rate in 400 counterfeit adapters tested for safety, fire, and shock hazards and found that 12 of the adapters posed a risk of lethal electrocution to the user."

P3 Program Participants at Work

The agency noted that the increasing threat of infectious diseases spurs the need for breakthrough technologies and capabilities to protect first responders and equip them with therapeutics to stop infectious agents.

Product Showcase

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More

  • Safety Shower Test Cart

    The Safety Shower Test Cart speeds up and simplifies emergency shower tests, ensures you stay in compliance with OSHA regulations, and significantly reduces testing costs. With 7 unique features, the cart makes testing easy, effective, and efficient. You can test water clarity, flow, temperature, and spread—all at the same time! Most safety shower testing kits create a mess, take too much time to use, and don't fully help you stay in compliance with OSHA & ANSI standards. Transform the way you test emergency showers with Green Gobbler Safety. Read More

Featured

Artificial Intelligence

Webinars