According to a new highway work zone study conducted by the Associated General Contractors of America, 67 percent of highway contractors report that motor vehicles had crashed into their construction work zones during the past year.
The NIOSH Center for Occupational Robotics Research has partnerships in placed with the Robotic Industries Association, Ohio State University, and North Carolina State University ISE. It will partner with the National Science Foundation a year from now, said Chuck Geraci, Ph.D., CIH, FAIHA, who is NIOSH's associate director for emerging technologies.
Communication is critical on construction sites. Whether for coordinating movement of materials or issuing warnings, it is important that workers be able to clearly communicate with each other.
Five surface mines will also receive a special award in honor of the entire crew working five years without a lost time accident.
IMAGE: SEATTLE TIMES
Failure to provide an effective mitigation for a hazardous curve and inadequate training of a locomotive engineer led to the overspeed derailment of an Amtrak passenger train that hurtled off a railroad bridge and onto a busy DuPont, Wash., highway, the National Transportation Safety Board announced Tuesday.
Champion Modular Inc. faces $687,650 in penalties.
WorkSafeBC aims to raise awareness about the risk of hearing loss in the service industry with the release of a new safety bulletin and other resources for workers and employers.
For the first time in four years, the National Safety Council estimates fewer than 400 fatalities on the road during Memorial Day weekend.
The British Safety Council’s recently released report, Impact of air pollution on the health of outdoor workers, makes an argument for recognizing air pollution as an occupational health hazard in Britain.
In the 33rd year for these scholarships, the 3M Personal Safety Division is giving $5,000 to three students who are pursuing graduate degrees in occupational health and safety/industrial hygiene.
Workers at the Yucca Mountain Project in Nevada could be exposed to potentially serious respiratory and radiation hazards if the long-planned High Level Nuclear Waste repository is revived and advanced by Congress, two presenters explained in an educational session at this week's AIHce EXP 2019 conference and expo here.
AIHce EXP 2019 attendees filled a meeting room May 20 to learn about current NIOSH work projects on chemical risk assessments and management of those risks
Until further notice, ATC facilities will no longer accept requests to operate recreational drones in controlled airspace on a case-by-case basis. Instead, FAA is granting temporary airspace authorizations to fly in certain "fixed sites" in controlled airspace throughout the country.
The award recognizes technology and innovation at the New Orleans Real-Time Crime Center.
The FY2019 annual fees are increasing for operating reactors, research and test reactors, and some materials users. Annual fees will decrease for spent fuel storage/reactor decommissioning, fuel facilities, select materials users, U.S. Department of Energy transportation activities, and the DOE Uranium Mill Tailings Radiation Control Act Program.
For those of you who don't know, I'm Sydny Shepard, the soon-to-be Editor of Occupational Health & Safety upon Jerry Laws' retirement at the end of June.
From repairing electrical lines with thousands of volts running through them to orchestrating precise tasks hundreds of feet above the deck on an oil rig, lineman and oil and gas workers face countless hazards daily.
The agency seeks comments by Aug. 18. OSHA is interested in comments on the use of control circuit-type devices to isolate energy and also the evolving technology for robotics.
The partners will focus on falls, electrical safety, silica exposure, and safe practices for steel erectors and aerial boom lifts.
The American National Standards Institute has announced the schedule of events for World Standards Week 2019, which is set for Nov. 4-8, 2019, in Washington, D.C. A Legal Issues Forum concerns cannabis regulation and standardization.