Articles


Construction Company Found in Contempt of Court For Not Paying OSHA Fines

The decision found that New Jersey-based Altor Inc. and its owner were ultimately liable for paying the full penalty amount of $412,000.

Ohio Plumbing Contractor Cited for Multiple Hazards Following Employee Fatality

Payne Enterprises Inc. has been placed in the Severe Violator Enforcement Program after an employee was killed in a trench collapse. The company has two repeated violations as it was cited for violations related to the trench collapse in 2017 and 2018.

New Software Reduces Risk of Post Blast Ground Falls in Mines

Mining engineers can use the DRIFT program to develop conceptual blast designs and produce potential damage calculations.

After Five Amputation Incidents in 14 Months, Missouri Company Faces Over $400,000 in OSHA Penalties

Inspectors found that Missouri Cooperage Company continued to commit the same violation it was cited for in 2018.

Robotics in the Workplace Initially Increase Safety, but Pose New Hazards

Robotics in the Workplace Initially Increase Safety but Pose New Hazards

The introduction of robots in the workplace has brought safety in certain situations, but potential hazards have also started to emerge. The documentation of these hazards will hopefully aid workers in avoiding future injuries.

British Government Considers Policies to Increase Protections for Disabled Workers

Some of the proposals include new worker rights to request accommodations from employers and know sick leave policies in advance.

AI Tool Could Identify Serious Illnesses through Photographs

AI Tool Could Identify Serious Illnesses through Photographs

An AI tool might be the new way to identify cancer types and genetic changes in lung tumors, according to a recent study by researchers at NYU School of Medicine. The tool can use just a photograph to identify serious diseases.

University of Arizona Researchers Study Diesel Fuel Alternatives to Reduce Disease in Miners

University of Arizona Researchers Study Diesel Fuel Alternatives to Reduce Disease in Miners

Previous research showed that even when miners were exposed to fewer harmful diesel particles, they still developed lung issues.



California Labor Contractor Violates Migrant Seasonal Workers Protection Act

In 2017, one worker was killed and six others injured after a van with a blown tire and a missing seatbelt overturned. Healthy Harvesting Inc. and Fernando Pineda Garcia now are being required to pay $79,153 in civil penalties.

New York Manufacturer Cited by OSHA for Repeat Safety Violations at Long Island Plant

After an employee suffered a fractured hand at the facility, OSHA investigators discovered a series of issues at U.S. Nonwoven Corp.

NIOSH Examines Effects of Secondhand Cannabis Smoke in Police Officers

NIOSH Examines Effects of Secondhand Cannabis Smoke in Police Officers

NIOSH staff evaluated the effects of secondhand cannabis smoke in police officers who were on patrol as security for campus concert events at a university football stadium.

Automotive Glass Manufacturer Faces $724,380 in Federal Penalties

Fuyao Glass America has been cited for nine repeated and 13 serious violations. The company has been inspected by OSHA 12 times in the past four years.

OSHA Partners with Construction Contractor to Promote Workplace Safety in Atlanta

PHOTO: Midtown Alliance

OSHA Partners with Construction Contractor to Promote Workplace Safety in Atlanta

OSHA has entered into a partnership with an Atlanta, Ga. contractor to promote workplace safety during construction project.

National Heatstroke Prevention Day

National Heatstroke Prevention Day is July 31

July 31 is National Heatstroke Prevention Day, here are some tips to staying cool.

OSHA Issues Alerts Concerning Workplace Hazards For Employees in Flood Zones, Hot Temperatures

The alerts come as parts of the U.S. experience major flooding and record hot temperatures

Research Shows Digital Tool Could Help to Build Safer Buildings

Research funded by IOSH and Glasglow Caledonian University has found the use of a hazard-identifying tool could educate architects on typical design-related hazards.

Wisconsin Lumber Company Faces Nearly $350,000 in Penalties, Labeled Severe Violator

After a worker was caught in an outdoor bark conveyor belt and suffered fatal injuries, OSHA cited Pukall Lumber Company Inc. for two willful violations and 13 serious violations. The company is now in the Severe Violator Enforcement Program.

3M Issues Immediate Recall of Two Fall Protection Devices, Citing Safety Concerns

3M Issues Immediate Recall of Two Fall Protection Devices, Citing Safety Concerns

The corporation issued the recall and stop use before any serious incidents took place due to the faulty equipment.

Cal/OSHA Reminds Employers About Heat Illness Prevention Standards

As temperatures in across the Central Valley in California are expected to reach triple digits in the next few weeks, Cal/OSHA is reminding employers that shade must be made available to workers at all times.

Product Showcase

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

  • Kestrel 5400 Heat Stress Tracker WBGT Monitoring for Workplace Safety

    Ensure safety with the Kestrel® 5400 Heat Stress Tracker, the go-to choice for safety professionals and endorsed by the Heat Safety & Performance Coalition. This robust, waterless WBGT meter is ideal for both indoor and outdoor environments, offering advanced monitoring and data logging essential for OSHA compliance. It features pre-programmed ACGIH guidelines and alert settings to quickly signal critical conditions. Integrated with the cloud-based Ambient Weather Network, the 5400 allows managers to view, track, and log job site conditions remotely, ensuring constant awareness of potential hazards. Its capability for real-time mobile alerts and remote data access promotes proactive safety management and workplace protection, solidifying its role as a crucial tool in industrial hygiene. Read More

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More

Featured

Artificial Intelligence

Webinars