OSHA Finds Florida Labor Contractor Could Have Prevented Fatal Heatstroke Incident

OSHA Finds Florida Labor Contractor Could Have Prevented Fatal Heatstroke Incident

McNeill Labor Management Inc. became subject of an investigation following the death of a 26-year-old worker.

Following an incident in Belle Glade, Florida, resulting in the death of a 26-year-old worker due to heatstroke, an OSHA investigation found that labor contractor McNeill Labor Management Inc. failed to implement adequate heat illness prevention measures.

According to a recent release, the victim—who was employed under the federal H-2A program for temporary nonimmigrant workers—collapsed while working in extreme heat in an open field. Despite exhibiting symptoms of heat-related illness and expressing discomfort, the worker did not receive appropriate assistance before collapsing.

OSHA's investigation revealed McNeill Labor Management could have prevented the tragedy by implementing heat-related safety protocols to protect workers, such as acclimation plans and mandatory rest breaks. In response, OSHA cited McNeill Labor with $27,655 in penalties and one serious violation for exposing workers to high ambient heat hazards and failing to report the worker's hospitalization and subsequent death.

Based in Belle Glade, McNeill Labor Management Inc. has opted to contest OSHA’s findings before an independent commission. For more information about OSHA’s Heat Illness Prevention Campaign, visit the initiative's website at www.osha.gov/heat.

About the Author

Robert Yaniz Jr. is the Content Editor of Occupational Health & Safety.

Product Showcase

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! 3

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. 3

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. 3

Featured

Webinars