Legionella Management: Back to Basics

Legionella Management: Back to Basics

This article outlines the basics of legionella management, legionella risk assessments, legionella training and competence for any organization and governance with a focus on the UK.

It is very important to ensure you understand exactly what needs to be done on your site to ensure compliance with guidance, as a minimum; if there are any areas of ambiguity these should be resolved as soon as possible.

Legionnaires’ Disease is considered a preventable disease because we inadvertently design and build systems that may facilitate the growth of Legionella bacteria to a level that represents a risk to public health. It is therefore the landlord/duty holder’s responsibility to ensure that the property/properties under their control are suitably managed to mitigate Legionella risk—as far as reasonably practicable.

If you are using a water hygiene company in the UK, ask yourself if they are a member of the Legionella Control Association. Membership requires an organization to provide a commitment to ensure that all clients are aware of their obligations under ACoP L8HSG274 and any other applicable guidance, such as (S)HTM 04-01or (S)HTM 01-05 safe water in healthcare premises, which provides the basis for all controls you may require.

Legionella Risk Assessment

A Legionella risk assessment for your property should be carried out to identify the assets on site and the required pre-planned maintenance. Once the schedule of pre-planned maintenance tasks begins, the findings should be reviewed and actions taken if the results fall outside the recommended ranges.

From this, you have a responsibility to produce a clear and concise written scheme of control (part of your Water Safety Plan). If you employ Water Treatment/Water Hygiene companies as service providers to help you deliver part of the work, they too should be named in this document.

It is important to note that in the UK, the two-year frequency for carrying out a new risk assessment was removed from ACoP L8 in 2013, however, this doesn’t mean that the assessment is a finished document as regular risk assessment reviews should be undertaken by competent personnel routinely to ensure continued compliance and if established these should be discussed by your Water Safety Group.

Legionella Training

Duty holders have the responsibility to keep a safe estate to adequately protect occupants from waterborne pathogens such as Legionella and opportunistic pathogens. Failure to do so is likely to result in prosecution depending upon the extent of non-compliances/water management failings that have been identified.

Regular training of staff, both internal and external, is an important aspect of maintaining control and should be routinely reviewed and be appropriate for the role they are undertaking. There are many Legionella training courses available, specific to each role within water safety, including ones on the risks for all staff and ones for maintenance personnel, maintenance managers/supervisors and senior managers.

Assessing Competency

One of the key responsibilities of a duty holder is to fully understand how to ensure that estate operational/technical plans are suitable and sufficient and fit for purpose. These are required to address Legionella risk associated with the property/estate they are responsible for.

If however, the duty holder does not have the required competencies to enable them to design, implement and update these technical plans, referred to as a written scheme, then this authority/responsibility may be devolved to a nominated competent person within the organization. This person must be formally appointed in writing by the duty holder as is often referred to as the Responsible Person for Water (RP[W]).

Defining “competence” is therefore critical and of significant importance to maintain control and ensure that the person has the skills, knowledge, attitude, training and experience to deliver the role competently.

The Health and Safety Executive (HSE) describe competence as “the combination of training, skills, experience and knowledge that a person has and their ability to perform a task safely,” so competence in health and safety should be seen as an important part of “workplace activities” rather than an add-on or afterthought.

Therefore, when identifying a “competent person” for water management, that person should take a holistic approach to all associated health and safety. This requires continuous improvement, which includes undertaking and completing relevant competency-based water hygiene Legionella training and appraisals. This approach will help to ensure the smooth operation of the property/properties under their control.

Failure to formally appoint an appropriately trained individual(s) is likely to be non-compliant which will present a potential risk of harm to service users, contractors and the general public/users of the property/properties under their control. This could lead to legal action being taken against an organization.

Product Showcase

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • Kestrel 5400 Heat Stress Tracker WBGT Monitoring for Workplace Safety

    Ensure safety with the Kestrel® 5400 Heat Stress Tracker, the go-to choice for safety professionals and endorsed by the Heat Safety & Performance Coalition. This robust, waterless WBGT meter is ideal for both indoor and outdoor environments, offering advanced monitoring and data logging essential for OSHA compliance. It features pre-programmed ACGIH guidelines and alert settings to quickly signal critical conditions. Integrated with the cloud-based Ambient Weather Network, the 5400 allows managers to view, track, and log job site conditions remotely, ensuring constant awareness of potential hazards. Its capability for real-time mobile alerts and remote data access promotes proactive safety management and workplace protection, solidifying its role as a crucial tool in industrial hygiene. Read More

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

Featured

Webinars