U.S. Department of Labor finds Tampa Smelter Willfully Exposing Workers to Unsafe Levels of Airborne Lead

U.S. Department of Labor finds Tampa Smelter Willfully Exposing Workers to Unsafe Levels of Airborne Lead

OSHA proposes $319K in penalties to address these violations.

Despite warnings since March of 2020 of unsafe measures of land exposure, a Tampa battery recycling facility and smelter did not make changes that resulted in a worker exposure to lead inhalation hazards, a federal workplace safety investigation found. The U.S. Department of Labor’s OSHA cited Envirofocus Technologies LLC, operating as Gopher Resource LLC, with a willful violation for exposing workers to inhalation hazards. The company also failed to provide adequate respirators that could have kept worker exposure to hazardous substances at or below the acceptable level.

OSHA also cited Gopher Resource for:

  • Allowing cadmium, lead and inorganic arsenic exposure levels above the permissible exposure limit.
  • Not implementing adequate engineering and work practice controls to prevent lead and inorganic arsenic exposure levels above the permissible exposure limit.
  • Failing to provide an annual update of the written compliance program for cadmium, inorganic lead and arsenic.
  • Allowing workers to share aluminized jackets that were damaged and stored in the open, and exposed to lead.
  • Requiring workers to wear respirators that were not fit-tested annually.
  • Using shoveling, sweeping or brushing methods to remove lead accumulations.
  • Not identifying all hazards on entry permits.

Proposed penalties total $319,876.

“This employer put their bottom line above the safety and well-being of their workers,” said OSHA Area Director Danelle Jindra in Tampa. “Every worker has the right to a safe workplace, and they should never have to decide between their own health and earning a living. Continuing to put workers in harm’s way is unacceptable, and OSHA will continue to hold employers like Gopher Resource responsible.”

According to a press release, OSHA also cited A & B Maintenance & Construction Inc., a Tampa-based company that provides supplemental maintenance at the Gopher facility, for failing to maintain a written respiratory protection program and allowing excess lead exposure. The company faces $16,384 in penalties. Gopher Resource is a secondary lead smelter that recycles automotive batteries by separating their components to capture lead, acid and plastic then processes those materials.

The companies have 15 business days from receipt of their citations and penalties to comply, request an informal conference with OSHA’s area director or contest the findings before the independent OSHRC. Learn more about controlling exposure to chemical hazards and toxic substances here.

About the Author

Shereen Hashem is the Associate Content Editor for Occupational Health & Safety magazine.

Product Showcase

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. Read More

  • AirChek Connect Sampling Pump

    Stay connected to your sampling with the SKC AirChek® Connect Sampling Pump! With its Bluetooth connection to PC and mobile devices, you can monitor AirChek Connect pump operation without disrupting workflow. SKC designed AirChek Connect specifically for all OEHS professionals to ensure accurate, reliable flows from 5 to 5000 ml/min and extreme ease of use. AirChek Connect offers easy touch screen operation and flexibility. It is quality built to serve you and the workers you protect. Ask about special pricing and a demo at AIHA Connect Booth 1003. Read More

Featured