What OSHA’s Revised COVID-19 Guidance Means for Employers

While this guidance does not create new legal obligations, employers should note that new legal obligations from OSHA relating to COVID-19 are likely forthcoming.

Following President Biden’s executive order on Protecting Worker Safety—which required OSHA to issue revised guidance to employers on COVID-19—OSHA recently issued its latest guidance, “Protecting Workers: Guidance on Mitigating and Preventing the Spread of COVID-19 in the Workplace.”

The guidance emphasizes the use of a COVID-19 prevention program as “the most effective way” to slow the spread of COVID-19 in the workplace and identifies key elements an employer’s program should contain, including:

1. Assignment of a workplace coordinator who will be responsible for COVID-19 issues on the employer's behalf.

2. Identification of where and how workers might be exposed to COVID-19 at work.

3. Identification of a combination of measures that will limit the spread of COVID-19 in the workplace, in line with the principles of the hierarchy of controls.

4. Consideration of protections for workers at higher risk for severe illness through supportive policies and practices.

5. Establishment of a system for communicating effectively with workers and in a language they understand.

6. Educate and train workers on your COVID-19 policies and procedures using accessible formats and in a language they understand.

7. Instruct workers who are infected or potentially infected to stay home and isolate or quarantine to prevent or reduce the risk of transmission of COVID-19.

8. Minimize the negative impact of quarantine and isolation on workers.

9. Isolating workers who show symptoms at work.

10. Performing enhanced cleaning and disinfection after people with suspected or confirmed COVID-19 have been in the facility.

11. Providing guidance on screening and testing.

12. Recording and reporting COVID-19 infections and deaths.

13. Implementing protections from retaliation and setting up an anonymous process for workers to voice concerns about COVID-19-related hazards.

14. Making a COVID-19 vaccine or vaccination series available at no cost to all eligible employees.

15. Not distinguishing between workers who are vaccinated and those who are not.

16. Application of other applicable OSHA Standards, such as PPE requirements, respiratory protection, sanitation, protection from blood-borne pathogens, requirements for employee access to medical and exposure records and the General Duty Clause.

The guidance also contains recommendations for employers to limit the spread of COVID-19 in the workplace, including:

• Isolating workers who have or likely have COVID-19

• Quarantining workers exposed to COVID-19

• Implementing physical distancing and barriers

• Using face coverings

• Improving ventilation

• Using PPE as necessary

• Providing supplies for good hygiene practices

• Performing routine cleaning and disinfection

Employers that have been following OSHA and other federal and state agency guidance will not find too many surprises in these recommendations, as they largely incorporate prior guidance. One new issue raised by the guidance, however, is vaccination. In addition to making vaccinations available at no cost, OSHA recommends employers provide training on the “benefits and safety of vaccinations” and advises that employees who have been vaccinated “must continue to follow protective measures.” Employers looking to implement a vaccination program should review the U.S. Equal Employment Opportunity Commission’s guidance on vaccinations.

As with all OSHA guidance, this latest guidance is not a standard or regulation, and it creates no new legal obligations. However, it is possible an OSHA inspector will review or rely on this guidance when determining whether to issue a citation. For example, an inspector may rely on the hazards identified in the guidance as support for the “recognized hazard” requirement of a general duty clause violation. We recommend employers review the guidance carefully and implement all applicable, feasible measures identified therein.

Finally, while this guidance does not create new legal obligations, employers should note that new legal obligations from OSHA relating to COVID-19 are likely forthcoming. The executive order that required OSHA’s latest guidance also ordered OSHA to “consider whether any emergency temporary standards on COVID-19, including with respect to masks in the workplace, are necessary, and if such standards are determined to be necessary, issue them by March 15, 2021.” We expect OSHA to issue emergency temporary standards to this effect.

Product Showcase

  • Kestrel 5400 Heat Stress Tracker WBGT Monitoring for Workplace Safety

    Ensure safety with the Kestrel® 5400 Heat Stress Tracker, the go-to choice for safety professionals and endorsed by the Heat Safety & Performance Coalition. This robust, waterless WBGT meter is ideal for both indoor and outdoor environments, offering advanced monitoring and data logging essential for OSHA compliance. It features pre-programmed ACGIH guidelines and alert settings to quickly signal critical conditions. Integrated with the cloud-based Ambient Weather Network, the 5400 allows managers to view, track, and log job site conditions remotely, ensuring constant awareness of potential hazards. Its capability for real-time mobile alerts and remote data access promotes proactive safety management and workplace protection, solidifying its role as a crucial tool in industrial hygiene. Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More


Artificial Intelligence