DOT Fines Allegiant Air $225,000 for Tarmac Delay Violations

DOT's Aviation Enforcement Office found that during the summer months of 2016 and 2017, Allegiant Air failed to provide passengers a comfortable cabin temperature on 10 flights delayed on the tarmac at airports in Las Vegas; El Paso; Dayton, Ohio; and Albuquerque.

The U.S. Department of Transportation recently fined Allegiant Air, LLC $225,000 for violating federal law and the department's airline consumer protections rules concerning tarmac delays and ordered it to cease and desist from future similar violations.

DOT's Aviation Enforcement Office found that during the summer months of 2016 and 2017, Allegiant Air failed to provide passengers a comfortable cabin temperature on 10 flights delayed on the tarmac at airports in Las Vegas; El Paso; Dayton, Ohio; and Albuquerque. In one of those instances, Allegiant did not provide food and water to passengers in a timely manner or announce to passengers that they had an opportunity to deplane, as required by DOT rules, according to the consent order in the case.

The consent order is available at www.regulations.gov, docket number DOT-OST-2018-0001. It says the office investigated 10 flights, five each in 2016 and 2017. The order says Allegiant maintains that it takes compliance with laws and regulations very seriously, and it noted that the affected flights were all subject to outdoor temperatures in the triple-digit range, including some exceeding 110 degrees F, which made it difficult to keep the aircraft cool despite using all means available to the airline.

The consent order says Allegiant is revising its training and procedures to more effectively address cabin temperature and cabin provisioning issues, and that its fleet renewal program, which will retire from service its MD-80 series aircraft, which are the most prone to cabin temperature issues, is being accelerated, with completion to occur by late 2018.

Product Showcase

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

Featured

Artificial Intelligence