Bloodborne Pathogens Compliance Still a Concern

Two former OSHA staffers identified the agency's most-cited violations during 25 years of enforcement (1991-2015), presenting their findings at AIHce EXP 2018.

PHILADELPHIA -- Having an OSHA standard in place for more than a quarter century is no guarantee that compliance with it is ensured. In fact, widespread non-compliance may be continuing, as two former OSHA staffers reported during a May 23 session at AIHce EXP 2018 here.

Amber Mitchell, DrPH, MPH, president and executive director of the International Safety Center, and Michael Pannell, Ph.D., CIH, of the NASA Stennis Space Center, checked about 100,000 OSHA inspections conducted from 1991 to 2015 and then focused on 31,066 of them in which a total of 77,142 violations of the OSHA bloodborne pathogens standard were cited. They found that the inspections dropped off significantly during the final years of that period:

  • 1991-95: 7,657
  • 1996-2000: 6,226
  • 2001-05: 7,478
  • 2006-2010: 5,664
  • 2011-14: 4,041

Exposure control plan violations were consistently cited most often -- they were cited in 33.9 percent of the 31,066 inspections -- but recordkeeping violations and having available engineering controls not in use also were relatively high in terms of citations, according to their presentation.

Mitchell said sutures and scalpels are the chief cause of sharps injuries to physicians, while syringes are for nurses. Citing data from EPInet, she said 2015 summary incident data show that 32.8 percent of health care employees who reported a bloodborne pathogens exposure said they had used a safe device, but 52 percent of them indicated the safety feature on the device was not activated at the time.

"It's pretty evident . . . that the bloodborne pathogens standard is a critical tool to make sure that [affected] employees have the greatest protection that we can offer," said Pannell. "As Amber has shown, there's a lot of non-compliance, even when safety devices are used."

"Inspections have decreased quite a lot, and then the focus areas are the exposure control plan," Mitchell said.

Product Showcase

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • Safety Shower Test Cart

    The Safety Shower Test Cart speeds up and simplifies emergency shower tests, ensures you stay in compliance with OSHA regulations, and significantly reduces testing costs. With 7 unique features, the cart makes testing easy, effective, and efficient. You can test water clarity, flow, temperature, and spread—all at the same time! Most safety shower testing kits create a mess, take too much time to use, and don't fully help you stay in compliance with OSHA & ANSI standards. Transform the way you test emergency showers with Green Gobbler Safety. Read More

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. Read More

Featured

Artificial Intelligence