The summer construction season means workers and safety managers must be prepared for heat stress, falls, puncture and crushing injuries, and noise exposures.

Fifth Stand-Down on Preventing Construction Falls Set for May 7-11

"The Stand-Down is not limited only to construction industry trades," Dean McKenzie, director of OSHA's Directorate of Construction, and Christine M. Branche, Ph.D., FACE, principal associate director of NIOSH and director of its Office of Construction Safety and Health, said in an email. "Each year, large corporations and small companies have joined us to make this effort a success."

The fifth annual National Safety Stand-Down to Prevent Falls in Construction is taking place during the week of May 7-11, with OSHA, NIOSH, and CPWR urging employers to take part. This is the seventh year of the National Construction Fall Prevention Campaign, and the two federal agencies are asking employers to set aside time to have open discussions about fall prevention.

Falls are still a leading cause of deaths in construction. During 2016, there were 370 fatalities related to falls out of 991 total fatalities in U.S. construction.

The agencies reported that during the past four years, thousands of companies participated in the National Safety Stand-Down, reaching some 7.5 million employees across the United States and internationally through more than 130 public events and thousands of private stand-downs per year. The focus for employers should be to:

  • PLAN ahead to get the job done safely;
  • PROVIDE the right equipment; and
  • TRAIN everyone to use the equipment safely

"The Stand-Down is not limited only to construction industry trades," Dean McKenzie, director of OSHA's Directorate of Construction, and Christine M. Branche, Ph.D., FACE, principal associate director of NIOSH and director of its Office of Construction Safety and Health, said in an email. "In fact, due to valuable information gathered from your participation in previous National Stand-Downs, we have found that many stakeholders within the construction industry as well as general industry and governmental entities join us in this event each year. Each year, large corporations and small companies have joined us to make this effort a success. If your employees work at height or are exposed to falls, you have a vested interest in standing down your operations to emphasize fall protection or other safety-related topics.

OSHA's information is located at http://www.osha.gov/StopFallsStandDown and on the Campaign webpage, http://www.osha.gov/stopfalls/index.html. NIOSH's information is available at https://www.cdc.gov/niosh/construction/stopfalls.html. CPWR's information is available at http://stopconstructionfalls.com.

Product Showcase

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" 3

  • Safety Shower Test Cart

    The Safety Shower Test Cart speeds up and simplifies emergency shower tests, ensures you stay in compliance with OSHA regulations, and significantly reduces testing costs. With 7 unique features, the cart makes testing easy, effective, and efficient. You can test water clarity, flow, temperature, and spread—all at the same time! Most safety shower testing kits create a mess, take too much time to use, and don't fully help you stay in compliance with OSHA & ANSI standards. Transform the way you test emergency showers with Green Gobbler Safety. 3

  • SlateSafety BAND V2

    SlateSafety BAND V2

    SlateSafety's BAND V2 is the most rugged, easy-to-use connected safety wearable to help keep your workforce safe and help prevent heat stress. Worn on the upper arm, this smart PPE device works in tandem with the SlateSafety V2 system and the optional BEACON V2 environmental monitor. It includes comprehensive, enterprise-grade software that provides configurable alert thresholds, real-time alerts, data, and insights into your safety program's performance all while ensuring your data is secure and protected. Try it free for 30 days. 3

Featured