A recalled 2014 Ranger XP 900 from Polaris Industries, Inc.

Polaris Industries Paying $27.25 Million Civil Penalty

CPSC reported that between December 2013 and July 2016, Polaris received 36 reports of fires associated with its model year 2014 Rangers and made two design changes to the vehicle to prevent the heat shield from becoming loose and falling off.

Polaris Industries, Inc. of Medina, Minn., has agreed to pay a $27.25 million civil penalty, the U.S. Consumer Product Safety Commission announced April 2, to settle charges that Polaris failed to immediately report to CPSC that models of its RZR and Ranger recreational off-road vehicles contained defects that could create a substantial product hazard or that vehicles created an unreasonable risk of serious injury or death.

Polaris manufactured and distributed approximately 133,000 model year 2013-2016 RZR 900 and model year 2014-2016 RZR 1000 vehicles. CPSC's staff charged that Polaris received information they could catch fire while consumers were driving, posing fire and burn hazards to drivers and passengers. Despite having this information, Polaris failed to immediately notify CPSC of the defect or risk posed by the vehicles, as required by federal law.

By the time Polaris did report the defect or risk, it had received reports of 150 fires, including one that resulted in the death of a 15-year old passenger, 11 reports of burn injuries, and a fire that consumed 10 acres of land, CPSC reported April 2.

Its news release said between December 2013 and July 2016, Polaris received 36 reports of fires associated with its model year 2014 Rangers and made two design changes to the Rangers to prevent the heat shields from becoming loose and falling off. Polaris manufactured and distributed approximately 93,500 model year 2014-2015 Ranger XP 900, XP 900 EPS, and CREW 900 off-road vehicles; CPSC staff charged that the Rangers contained a defect that could create a substantial product hazard or create an unreasonable risk of serious injury or death because the heat shield could fall off the vehicle. Polaris reported the fires on model year 2014 Rangers to CPSC in July 2016 and announced a recall of 42,500 model year 2014 ROVs in September 2016.

"After the recall, Polaris received reports of heat shields coming loose or falling off of the model year 2015 Ranger, including reports of fires. Polaris failed to immediately notify CPSC of the defect or risk posed by the model year 2015 ROVs, as required by federal law. By the time Polaris did report, it had received ten reports of heat shield incidents, including five reports of fires. Subsequently, CPSC and Polaris announced a recall of 51,000 ROVs in April 2017," the release states.

It says in addition to resolving the charged violations relating to the RZRs and Rangers, CPSC agreed not to seek civil penalties from Polaris for any failure to report a hazard or defect in a model year vehicle that Polaris had reported to staff by June 29, 2017, and Polaris has agreed to maintain an enhanced compliance program to ensure compliance with the Consumer Product Safety Act and a related system of internal controls and procedures designed to ensure timely reporting in the future.

Product Showcase

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

Featured

Artificial Intelligence