One Tall Order

Wind turbines are getting larger and larger. Some turbines' nacelles can be about 160 meters—about 525 feet—above the ground, and the blades can be about 75 meters long.

Undoubtedly an engineering feat, Hywind Scotland also may present unique safety challenges, now that the 30MW wind farm floating off the coast of Scotland has become operational in October 2017. It consists of five turbines, each measuring 830 feet from its base to the tips of its 75-meter blades. The farm could be used in waters half a mile deep, and these five are 15 miles offshore.

It is the world's first commercial floating wind farm, operated by partners Statoil and Masdar; because it can operate in such deep water, it can work in areas that have been inaccessible for offshore wind, Irene Rummelhoff, executive vice president of the New Energy Solutions at Statoil, said Oct. 18.

Larger turbines produce more energy, so manufacturers have continued to develop taller towers and longer blades. But performing maintenance on them is more dangerous as a result.

Two years ago, during ASSE's Safety 2015 conference in Dallas, an insurance industry presenter on wind turbine safety hazards explained that the hazards turbine maintenance workers face—falls, confined spaces, fire hazards, lockout/tagout incidents, first aid injuries, electrical hazards, machine guarding, arc flash—are increased when they're working 300 feet above the ground, which makes rescue or descent more difficult. At sea and miles offshore, it could be particularly difficult.

He showed the audience a photo from a nacelle fire and explained that tool drops were one of the biggest challenges for the maintenance crews.

When that presentation was delivered, turbine height had soared by about 50 percent in just six years, to about 100-110 meters high, and by 96 percent in rotor diameter, and the speaker predicted annual installations would remain high through 2050. Now, some of the largest turbines' nacelles can be about 160 meters—about 525 feet—above the ground, and the blades can be about 75 meters long. The nacelles of the Hywind turbines are "large enough to fit two typical London double decker buses," according to Statoil.

This article originally appeared in the December 2017 issue of Occupational Health & Safety.

Product Showcase

  • EMSL Analytical, Inc. - Air Sampling Supplies & Testing Labs

    EMSL Analytical, Inc. operates laboratories throughout the United States and Canada. EMSL is a nationally recognized and locally focused provider specializing in fast laboratory results for Asbestos, Mold, Silica, Lead & Metals, Bacteria, Legionella, USP , Combustion By-Products, VOC’s, Radon, PCB’s, Formaldehyde, METH/Fentanyl, Identification of Dust & Unknowns. Sampling Pumps, Cassettes, Media & Supplies available. Reach us at 1-800.220.3675 3

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. 3

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm 3

Featured