Avoid splashing with water to avoid contaminating the area around sinks with heavy metals. Wash the hands for at least 30 seconds and dry with disposable paper towels.

CDC Investigations Find Common Sources of Health Care Infections

"Everything here is water-related, which tends to be the case with health care," said Bryan E. Christensen, an industrial hygienist and epidemiologist with CDC's National Center for Emerging and Zoonotic Infectious Diseases. "There really needs to be an increased role for the industrial hygiene field at health care facilities. It's something that needs more emphasis going forward."

SEATTLE -- Preventing serious health care-acquired infections (HAIs) may come down in many cases to relatively simple control measures, including rigorously practiced hand hygiene, better cleaning and disinfection practices, and ultimately improved facility design, a CDC investigator explained June 7 in a presentation given at the AIHce EXP conference here.

Bryan E. Christensen, Ph.D., an industrial hygienist and epidemiologist with CDC's National Center for Emerging and Zoonotic Infectious Diseases, discussed four recent HAI investigations, including one involving nontuberculous mycobacteria (NM) infections of patients who had undergone cardiopulmonary bypass surgery. The investigation centered on heating/cooling units used in the surgery, equipment that contained three water tanks, high-pressure pumps, and multiple fans, he said. "We're still investigating where it's actually coming from in the unit," he said, explaining they confirmed that NM contamination in the airflow entered the patients' chest cavities, but in these cases the resulting illness would manifest two or three years later and be fatal for some of them. NM is an opportunistic and emerging HAI, he said.

Possible controls to prevent these infections include using disposable water tanks and reconfiguring the operating rooms so the heating/cooling units are not inside the room during the operation, he said.

An estimated 727,000 HAI cases occurred in the United States in 2011 alone in acute care hospitals, resulting in about 75,000 deaths, he said.

Other cases he described included bloodstream infections among dialysis patients -- 58 cases were identified from July 2015 to November 2016, far more than the expected one case per year, and the main culprit there was a wall box containing both the drain for removing waste from patients' blood and a supposedly sterile reverse osmosis water line -- and pseudomonas infections in a neonatal intensive care unit (NICU), where better hand hygiene, filters, and chlorination were among the recommended infection controls. Christensen also described an investigation of infections among patients ages 2-11 who had undergone pulpotomy procedures in a dental office, with insufficient treatment of waterline output water being identified as a source of infections. Controls here could include a new water management and monitoring plan and not rinsing clean, sterile bottles with tap water, as well as using sterile water for all invasive procedures and relocating the bottle drying rack, he said.

"Everything here is water-related, which tends to be the case with health care," he said. "There really needs to be an increased role for the industrial hygiene field at health care facilities. It's something that needs more emphasis going forward."

Product Showcase

  • Kestrel 5400 Heat Stress Tracker WBGT Monitoring for Workplace Safety

    Ensure safety with the Kestrel® 5400 Heat Stress Tracker, the go-to choice for safety professionals and endorsed by the Heat Safety & Performance Coalition. This robust, waterless WBGT meter is ideal for both indoor and outdoor environments, offering advanced monitoring and data logging essential for OSHA compliance. It features pre-programmed ACGIH guidelines and alert settings to quickly signal critical conditions. Integrated with the cloud-based Ambient Weather Network, the 5400 allows managers to view, track, and log job site conditions remotely, ensuring constant awareness of potential hazards. Its capability for real-time mobile alerts and remote data access promotes proactive safety management and workplace protection, solidifying its role as a crucial tool in industrial hygiene. 3

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" 3

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. 3

Featured