Joint Commission Adopting 2012 NFPA Life Safety Code

It is following CMS' lead. The final rule CMS published this month adopts most of the proposals that CMS made in 2014, but CMS removed a proposed requirement for hospitals to install smoke-purging systems in operating rooms.

The Joint Commission announced May 13 that it will follow suit with the Centers for Medicare & Medicaid Services (CMS) and adopt the National Fire Protection Association's 101 Life Safety code, effective July 5, 2016. The organization reported it has advocated for CMS to adopt this change for years.

The rule adopts most of the proposals that CMS made in 2014, but CMS removed a proposed requirement for hospitals to install smoke-purging systems in operating rooms. George Mills, director of engineering at the Joint Commission, called the proposal "unnecessary" and "prohibitively expensive."

According to the Joint Commission, key provisions in the final rule include these:

  • Doors with roller latches will be limited only to doors opening to corridors and to rooms containing flammable or combustible materials.
  • By 2028, buildings taller than 75 feet will have to install automatic sprinkler systems.
  • Window sills in new construction only must not be higher than 36 inches above the floor.

The Joint Commission is an independent, not-for-profit organization that accredits and certifies nearly 21,000 health care organizations and programs in the United States. Its mission is to continuously improve health care for the public, in collaboration with other stakeholders, by evaluating health care organizations and inspiring them to excel in providing safe and effective care of the highest quality and value.

CMS had acted May 3, 2016, by publishing a final rule updating health care facilities' fire protection guidelines to improve protections for all Medicare beneficiaries in facilities from fire. The new guidelines apply to hospitals; long-term care facilities; critical access hospital; inpatient hospice facilities; programs for all-inclusive care for the elderly; religious non-medical health care institutions; ambulatory surgical centers; and intermediate care facilities for individuals with intellectual disabilities. The rule adopts updated provisions of the 2012 Life Safety Code, as well as provisions of NFPA's 2012 edition of the Health Care Facilities Code.

"This final rule meets health care facilities' desire to modernize their environments while also ensuring the necessary steps to provide patients and staff with the appropriate level of safety," said Dr. Kate Goodrich, M.D., MHS, director of the Center for Clinical Standards and Quality, CMS. "Health care facilities can now be more home-like while ensuring that the most modern fire protection practices are in place."

The final rule covers construction, protection, and operational features designed to provide safety for Medicare beneficiaries from fire, smoke, and panic. Health care facilities located in buildings that are taller than 75 feet will be required to install automatic sprinkler systems within 12 years after the rule's effective date, and health care facilities are required to have a fire watch or building evacuation if their sprinkler system is out of service for more than 10 hours.

According to CMS, the rule's provisions offer long-term care facilities more flexibility in what they can place in corridors. Currently, they cannot include benches or other seating areas because of fire code requirements limiting potential barriers to firefighters, but the rule allows them to include more home-like items such as fixed seating in the corridor for resting and certain decorations in patient rooms (such as pictures and other items of home décor). Fireplaces will be permitted in smoke compartments without a one-hour fire wall rating, which makes a facility more home-like for residents.

For ambulatory surgical centers, all doors to hazardous areas must be self-closing or must close automatically. Alcohol-based hand rub dispensers now may be placed in corridors to allow for easier access.

Product Showcase

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

  • Full Line of Defense Against Combustible Dust Nilfisk

    Nilfisk provides a comprehensive range of industrial vacuums meticulously crafted to adhere to NFPA 652 housekeeping standards, essential for gathering combustible dust in Class I, Group D, and Class II, Groups E, F & G environments or non-classified settings. Our pneumatic vacuums are meticulously engineered to fulfill safety criteria for deployment in hazardous surroundings. Leveraging advanced filtration technology, Nilfisk ensures the secure capture of combustible materials scattered throughout your facility, ranging from fuels, solvents, and metal dust to flour, sugar, and pharmaceutical powders. Read More

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

Featured

Artificial Intelligence