Starting Over on Nuclear Waste Storage

The strategy is to establish a pilot interim storage facility that mainly will accept used nuclear fuel from reactors that have already been shut down; a larger interim storage facility; and one or more long-term geologic repositories.

A Dec. 21, 2015, announcement from Franklin Orr, U.S. Department of Energy under secretary for science and energy, surprised me: He explained that DOE has again begun working on "a consent-based approach to siting future nuclear waste management facilities as part of a strategy for the long-term storage and disposal of spent nuclear fuel and high-level radioactive waste." Which was the goal of those seeking to inter such fuel and wastes at Yucca Mountain in Nevada for roughly 20 years.

While I doubt this could become a hot-button issue in the 2016 presidential campaigns, it's not impossible. Nevada's state and federal officials battled Yucca Mountain for years and ultimately found a president, Barack Obama, who agreed with them and killed the project, which had cost billions of dollars by then.

Orr explained that a consent-based siting process will ensure that communities, tribes, and states are partners comfortable with the location of future storage and disposal facilities before they are built. "We will be developing a detailed plan for this process in the coming year, and we need your help," he added.

DOE will follow the process laid out in a 2013 strategy document that was based on recommendations from President Obama's Blue Ribbon Commission on America's Nuclear Future. The strategy is to establish a pilot interim storage facility that mainly will accept used nuclear fuel from reactors that have already been shut down; a larger interim storage facility; and one or more long-term geologic repositories.

Orr asked the public to submit comments or concerns to [email protected], to visit energy.gov/consentbasedsiting, and to attend one of the public meetings that will take place across the country. The kickoff meeting was set for Jan. 20 in Washington, D.C.

This article originally appeared in the February 2016 issue of Occupational Health & Safety.

About the Author

Jerry Laws is Editor of Occupational Health & Safety magazine, which is owned by 1105 Media Inc.

Product Showcase

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. Read More

  • EMSL Analytical, Inc. - Air Sampling Supplies & Testing Labs

    EMSL Analytical, Inc. operates laboratories throughout the United States and Canada. EMSL is a nationally recognized and locally focused provider specializing in fast laboratory results for Asbestos, Mold, Silica, Lead & Metals, Bacteria, Legionella, USP , Combustion By-Products, VOC’s, Radon, PCB’s, Formaldehyde, METH/Fentanyl, Identification of Dust & Unknowns. Sampling Pumps, Cassettes, Media & Supplies available. Reach us at 1-800.220.3675 Read More

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

Featured