HSE

HSE Sounds Alarm About Construction Hazards

The agency's inspectors served more than 200 stop work notices during a month-long inspection initiative. The most common failure they found was employers' not providing basic safety measures for employees working at height -- 42 percent of all enforcement notices served cited this.

Britain's Health and Safety Executive sounded the alarm to the country's construction industry employers on Nov. 12, saying they should take extra measures after HSE's month-long inspection initiative found 40 percent of sites failing to properly protect workers. "Unacceptable conditions and dangerous practices were found at nearly half of the 1,748 repair and refurbishment sites visited by HSE inspectors, with 1 in 5 sites so poor, formal enforcement action was required. Many of the issues found could have been easily prevented with simple, straightforward management and planning," the agency announced.

Its inspection blitz focused on health risks. HSE said 35 percent of the notices served by inspectors were for issues such as management of asbestos; failure to control exposure to harmful dusts, noise, and vibration; and insufficient welfare. However, the most common failure they found was employers' not providing basic safety measures for employees working at height -- 42 percent of all enforcement notices served cited this.

"These results show that whilst the majority of employers in the refurbishment sector are getting it right, a significant part of the industry is seriously failing its workers," HSE Chief of Construction Philip White said. "The inability to properly plan working at height continues to be a major issue, despite well-known safety measures being straightforward to implement. It is just not acceptable that inspectors had to order work to stop immediately on over 200 occasions because of dangerous practices. We also find health is often overlooked as its implications are not immediately visible, however, the effects of uncontrolled exposure to deadly dusts such as asbestos and silica can be irreversible. We urge industry to ensure the most basic of measures, such as use of protective equipment and dust suppression methods, are put in place to help protect the future health of workers."

White added, "We need to continue to educate industry through initiatives like this and encourage a change in behavior on small projects where over half the industry's fatal accidents still occur and many workers become seriously ill."

Product Showcase

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

  • Full Line of Defense Against Combustible Dust Nilfisk

    Nilfisk provides a comprehensive range of industrial vacuums meticulously crafted to adhere to NFPA 652 housekeeping standards, essential for gathering combustible dust in Class I, Group D, and Class II, Groups E, F & G environments or non-classified settings. Our pneumatic vacuums are meticulously engineered to fulfill safety criteria for deployment in hazardous surroundings. Leveraging advanced filtration technology, Nilfisk ensures the secure capture of combustible materials scattered throughout your facility, ranging from fuels, solvents, and metal dust to flour, sugar, and pharmaceutical powders. Read More

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

Featured

Artificial Intelligence