Georgia Roofing Contractor Cited for Repeat and Serious Violations

The citations stem from work sites where employees were performing roofing work without fall protection.

Pablo Lopez of Norcross, Ga., has been cited by OSHA for three repeat and one serious safety violations following inspections at two work sites. These work sites, in Milton and Smyrna, included employees that were performing roofing work without fall protection. This comes after rounds of inspections as part of the agency's Regional Emphasis Program on Falls in Construction. The proposed penalties amount to $83,930 in total.

"It is unacceptable that Lopez continues to violate OSHA standards by exposing workers to serious fall hazards," said Christi Griffin, director of OSHA's Atlanta-West Area Office. "Allowing repeat violations to occur only demonstrates the employer's lack of commitment to safety and the lives of his workers."

The serious citation, with a $3,080 penalty, was issued for using a material lift as a ladder to access the roof, which exposed workers to fall hazards of up to 28 feet.

The repeat violations were cited for exposing workers to fall hazards between 14 and 24 feet when employees installed shingles on an unprotected, steep-sloped roof; for failure to ensure the extension ladder that workers used to access the roof extend 3 feet above the landing area; and for allowing employees to carry shingles from a material lift without wearing fall protection. These violations amount to $80,850 in total.

Product Showcase

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • Safety Shower Test Cart

    The Safety Shower Test Cart speeds up and simplifies emergency shower tests, ensures you stay in compliance with OSHA regulations, and significantly reduces testing costs. With 7 unique features, the cart makes testing easy, effective, and efficient. You can test water clarity, flow, temperature, and spread—all at the same time! Most safety shower testing kits create a mess, take too much time to use, and don't fully help you stay in compliance with OSHA & ANSI standards. Transform the way you test emergency showers with Green Gobbler Safety. Read More

  • Kestrel 5400 Heat Stress Tracker WBGT Monitoring for Workplace Safety

    Ensure safety with the Kestrel® 5400 Heat Stress Tracker, the go-to choice for safety professionals and endorsed by the Heat Safety & Performance Coalition. This robust, waterless WBGT meter is ideal for both indoor and outdoor environments, offering advanced monitoring and data logging essential for OSHA compliance. It features pre-programmed ACGIH guidelines and alert settings to quickly signal critical conditions. Integrated with the cloud-based Ambient Weather Network, the 5400 allows managers to view, track, and log job site conditions remotely, ensuring constant awareness of potential hazards. Its capability for real-time mobile alerts and remote data access promotes proactive safety management and workplace protection, solidifying its role as a crucial tool in industrial hygiene. Read More

Featured

Artificial Intelligence