The 2016 American Industrial Hygiene Conference & Expo is taking place May 21-26 at the Baltimore Convention Center in downtown Baltimore, Md.

New Standards, Enforcement Working, OSHA Chief Says

OSHA chief Dr. David Michaels discussed several enforcement initiatives of his agency May 24 at the AIHce 2016 conference

BALTIMORE -- OSHA chief Dr. David Michaels discussed several enforcement initiatives of his agency May 24 at the AIHce 2016 conference, including the new injury tracking regulation and the mandate to report amputations and hospitalizations of injured workers. During the first year the severe injury rule was in effect, OSHA received about 10,000 reports but did not inspect most of those workplaces, he said, choosing instead to call the employers and send them an accident investigation form. That has been very successful, he explained, and has brought some very severe cases to OSHA's attention at the agency otherwise would not have know about.

Michaels also supported the idea of vacating some outdated PELs where the limit that is in place is actually allowing unsafe exposures, he said, citing n-hexane as an example. Its PEL is 500, which is clearly too high to be safe, he said.

NIOSH's Dr. John Howard said nanotechnology is a good example of an area where his agency looks to international standards and beyond the current OSHA PELs for guidance. Both men agreed that he current model, proceeding chemical by chemical to write exposure limits is not useful in the 21st century, and both expressed support for the control banding approach, where limits are set for a group of similar substances of concern.

Howard urged the assembled industrial hygienists to participate in developing consensus standards, noting that the federal government's scientists are encouraged to do this.

Michaels said the injury tracking rule his agency recently issued and its revised silica exposure limits will be effective. As OSHA prepares to receive 400,000 companies' injury data and post it online, he said that will lead to better safety performance, likening it to a system used by New York City to give restaurants letter grades for hygiene and food safety. "This works," Michaels said.

Product Showcase

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. 3

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! 3

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. 3

Featured

Webinars