OSHA Nails Three Marine Corps Contractors for Crane, Trenching Hazards

OSHA cited the contractors for safety hazards after a worker received burns from an electrical shock during the installation of a new landfill gas processing and compression facility at the U.S. Marine Corps Logistic Base in Albany, Ga.

OSHA has cited Piedmont Mechanical Inc., Jim Boyd Construction Inc., and Chevron Energy Solutions Inc. for safety hazards after a worker received burns from an electrical shock during the installation of a new landfill gas processing and compression facility at the U.S. Marine Corps Logistic Base in Albany, Ga.

OSHA cited a total of three willful and eight serious safety violations with proposed penalties of $189,700 following an inspection begun in March after the incident, in which the boom tip of a crane contacted an overhead power line with a carrying capacity of more than 12,000 volts. Electricity traveled down the crane through a line that was connected to the load being moved by the crane and shocked the employee on the ground, who was holding the line.

Piedmont Mechanical was cited for one willful violation with a $56,000 penalty for failing to determine whether any part of the crane could get closer than 20 feet to the overhead energized power line, exposing workers to an electrical shock hazard. The company also was cited for two serious crane-related violations, one with a $3,500 penalty for positioning the crane on soil that was not sufficiently secure to support its weight and another with a $2,800 penalty for failing to inspect the crane before beginning the day's operations.

OSHA cited all three companies for safety violations involving trenching and excavation at the site. Piedmont Mechanical was cited for one willful violation with a $56,000 penalty, Jim Boyd Construction was cited for one willful violation with a $49,000 penalty, and Chevron Energy Solutions was cited for one serious violation with a $6,300 penalty for exposing employees to a cave-in hazard by allowing them to work in a deep trench where the top of the trench shields were 2 to 4 feet below the top of the trench. Chevron and Jim Boyd did not have any employees exposed to the hazardous conditions; however, Chevron, which was serving as the manager of the project, was cited as the controlling employer, and Jim Boyd, which excavated the trench and supplied and installed the protective trench shields, was cited as the creating and correcting employer.

Additionally, Jim Boyd and Piedmont were cited for one serious violation each with a $3,500 proposed penalty for allowing workers inside a trench where several sections of the trench shields were not connected with spreader bars. Each also was cited for one serious violation carrying another $3,500 proposed penalty for allowing workers in a trench where several sections of the trench shields were not flush against the walls of the trench, exposing workers to "crushed-by" and "struck-by" hazards. Finally, Jim Boyd was cited for a serious violation with a $2,100 penalty for allowing workers in a trench where one section of the trench shield system was damaged.

"When there are multiple companies operating together at the same site, which is often the case in construction projects, it is important that all the employers take a serious interest in the safety and health of the workers, and actively seek to prevent hazards like the ones we found here," said Robert Vazzi, director of OSHA's Savannah Area Office.

Proposed penalties total $125,300 for Piedmont Mechanical, $58,100 for Jim Boyd Construction and $6,300 for Chevron Energy Solutions. Chevron Energy Solutions is based in San Francisco and is a division of Chevron Corp. Piedmont Mechanical is based in Spartanburg, S.C., and Jim Boyd Construction is based in Albany, Ga.

Download Center

  • OSHA Recordkeeping Guide

    In case you missed it, OSHA recently initiated an enforcement program to identify employers who fail to electronically submit Form 300A recordkeeping data to the agency. When it comes to OSHA recordkeeping, there are always questions regarding the requirements and ins and outs. This guide is here to help! We’ll explain reporting, recording, and online reporting requirements in detail.

  • Incident Investigations Guide

    If your organization has experienced an incident resulting in a fatality, injury, illness, environmental exposure, property damage, or even a quality issue, it’s important to perform an incident investigation to determine how this happened and learn what you can do to prevent similar incidents from happening in the future. In this guide, we’ll walk you through the steps of performing an incident investigation.

  • Lone Worker Guide

    Lone workers exist in every industry and include individuals such as contractors, self-employed people, and those who work off-site or outside normal hours. These employees are at increased risk for unaddressed workplace accidents or emergencies, inadequate rest and breaks, physical violence, and more. To learn more about lone worker risks and solutions, download this informative guide.

  • Job Hazard Analysis Guide

    This guide includes details on how to conduct a thorough Job Hazard Analysis, and it's based directly on an OSHA publication for conducting JHAs. Download the guide to learn how to identify potential hazards associated with each task of a job and set controls to mitigate hazard risks.

  • The Basics of Incident Investigations Webinar

    Without a proper incident investigation, it becomes difficult to take preventative measures and implement corrective actions. Watch this on-demand webinar for a step-by-step process of a basic incident investigation, how to document your incident investigation findings and analyze incident data, and more. 

  • Vector Solutions

OH&S Digital Edition

  • OHS Magazine Digital Edition - November December 2022

    November December 2022

    Featuring:

    • IH: GAS DETECTION
      The Evolution of Gas Detection
    • OSHA TOP 10
      OSHA's Top 10 Most Frequently Cited Standards for FY 2022
    • FALL PROTECTION
      Enhance Your Fall Protection Program with Technology
    • 90TH ANNIVERSARY
      The Future: How Safety WIll Continue to Evolve
    View This Issue