The Sweat GUTR® sweatband, distributed by
Glove Guard LP, features a MicroLip™ design that captures and channels dripping sweat away from the eyes. The saturation-proof unit is reusable, is designed to reduce heat stress, and can be worn with safety glasses and hard hats.
Convergence Training’s Driver Safety Training videos and computer programs feature multiple safety courses, including driving preparation, alert driving, and driving hazard recognition. The series is designed for delivery drivers, building contractors, and organizations that require staff to drive personal or company vehicles.
Chums Inc.
Chums’ Kevlar® Original Retainer is resistant to sparks and welding spatter and will not ignite or smolder. The durable accessory fits most standard safety glass temples, meets NFPA 70E requirements, and retains fiber integrity and suppleness.
Streamlight Inc.
The PolyTac
® LED HP from
Streamlight® Inc. is built for a wide variety of industrial and utility uses. The unit features 150 lumens of measured system output; 15,000-candela peak beam intensity; C4
® power LED technology; a deep-dish parabolic reflector; and a polycarbonate lens with a scratch-resistant coating.
Grainger’s 2010 catalog features more than 300,000 maintenance, repair, and operating products, as well as technical information. The catalog highlights products that are designed to help users address key business challenges, such as sustainability, safety, and business continuity.
Carroll Manufacturing & Sales
The new, disposable, nonwoven FLAVORSEAL® face masks from
Carroll Manufacturing & Sales are designed to prevent workers who are exposed to cold or flu viruses from spreading the viruses. The masks are composed of three layers, with the middle layer having a BFE (bacterial filtration efficiency) of 99.9 percent for airborne particles.
The portable MeshGuard Rapid Deployment Kit from
RAE Systems is a pre-configured, ready-to-deploy system designed for field deployment where stationary gas detection is required. The device includes an FMC 2000 wireless controller, up to eight MeshGuard monitors, a dedicated wireless router, mounting brackets, and a rugged, weatherproof transportation case.
Allegro Industries' Manhole Ventilation Passthru is designed to maintain and redirect airflow into manholes, sewers, and tanks. The 11-pound, high-impact polyethylene unit features an air vent, a 90-degree elbow, a built-in mounting, and a collapsible duct that can withstand temperatures up to 180 degrees Fahrenheit.
MIDAC Corp.
The Titan industrial FTIR system from
MIDAC is designed to provide real-time, multi-component extractive gas phase analysis for applications including industrial hygiene, CEM, process optimization/control, specialty gas QC, and research. The system is equipped with a rugged industrial spectrometer, IR detectors, a dual ADC architecture, and AutoQuant Pro™ software.
ITW Dymon’s Safe-Mark™ Marker permanently labels storage bins, trays, machinery parts, and equipment where food products, including meat and poultry, are in repeated or continuous contact. The marker’s black ink works on a wide range of surfaces, including metal, glass, plastic, shrink film, cardboard, and rubber.
Industrial Scientific’s iNet gas detection service is designed to increase safety, boost equipment reliability, standardize equipment training, and provide alarm exposure and usage visibility. The service connects gas detectors to software that automates maintenance tasks, and collects, analyzes, and simplifies compliance data.
Magid Glove & Safety Mfg. Co. LLC
Magid Glove & Safety’s E2 IHB25 Banded Hearing Protector is a lightweight and flexible headband that stretches to fit a wide range of head sizes. Made from black polyurethane, the protector rests around the user’s neck when not in use, and includes a pair of hypoallergenic polyurethane foam cone-shaped ear plugs.
MCR Safety
Law 3 Protective Eyewear from
MCR Safety is geared to provide protection from dust, debris, small particles, and side impacts. The dielectric eyewear features TPR nose pads, an orbital seal, a wraparound design, open-cell foam, and a hybrid temple design.
Detcon’s Model 700 gas detection sensors are equipped with 4-20 mA analog and Modbus RS-485 outputs. The devices are designed to work with the RXT-300, which is a wireless gas detection system and Modbus replacement that links one master to one or more slaves.
MCR Safety
MCR Safety’s Memphis Multitask 925 all-leather gloves feature an elastic split deerskin gusset at the wrist, split deerskin at touch points on the forefinger and wing thumb, and a hook-and-loop adjustable wrist closure. The gloves are designed for Mig/Tig welding applications, grinding, light metal cutting, construction, pipe fitting, brick handling, and manufacturing.