Top Stories


New Hand Safety Website Launched

The www.choosehandsafety.org site launched by CPWR—The Center for Construction Research and Training, offers specific information tailored for the masonry trades.

International Process Safety Collaboration Announced

The Institution of Chemical Engineers and Texas A&M Engineering Experiment Station announced they have signed a Memorandum of Understanding.

OSHA Alleges 45 Willful Violations by NY Real Estate Developer, Issues $2.3M in Fines

Olivet Management LLC of Wingdale, N.Y., is cited for knowingly exposing workers to asbestos and lead during renovation work of the former Harlem Valley Psychiatric Center.



Amid Ebola Epidemic, WHO Delivers PPE for Guinea Health Workers

The geographic spread of cases so far, including in Conakry, the country's capital, makes this an unprecedented outbreak.

UK Food Standards Agency Changing Pork Inspection Rules

The Food Standards Agency has begun a six-week consultation on new rules for pork inspection rules that are set to be enacted in June 2014.

This memorial wall was erected to honor the 29 miners who died in the Upper Big Branch Mine South explosion on April 5, 2010. (MSHA photo)

WV Senator Denounces 'Upper Big Branch – Never Again' Documentary

Don Blankenship, former CEO of Massey Energy, had it made to challenge MSHA's conclusion that the explosion four years ago in which 29 miners died resulted from basic safety violations and was a coal dust explosion that started as a methane ignition.

PG&E Criminally Charged in San Bruno Pipeline Explosion

More than two years after NTSB concluded its inadequate quality assurance and quality control in 1956 during a pipeline relocation project caused the explosion, the utility faces 12 charges with potential penalties of $500,000 per charge.

OSHA Cites Company for Exposing Workers to Silica Dust

The agency has cited Grede Wisconsin Subsidiaries LLC for one repeat violation involving silica exposures.

London Fire Brigade: Most High-Rise Residents Lack Fire Plan

The brigade's survey found 60 percent of all high-rise residents -– approximately 760,000 households -– do not have a fire escape plan.

VA's Disability Claims Backlog Drops Sharply

The number of pending disability compensation claims peaked at more than 611,000 in March 2013, but the Department of Veterans Affairs has chopped it approximately 44 percent to 344,000 claims.

The welding arc creates extreme temperatures and may pose a significant fire and explosion hazard if safe practices are not followed. (The Lincoln Electric Company photo)

Be Prepared: Five Potential Welding Safety Hazards to Avoid

The welding arc creates extreme temperatures and may pose a significant fire and explosion hazard if safe practices are not followed.

This image comes from a video posted to DEUS Rescue

Incorporating Rescue Into a Fall Protection Plan

Standards should be the basis for any employer's fall protection and rescue program.

The purchasing manager tells me that since evaluating PPE selection beyond the mere paper value, they

Make No Haste in PPE Selection for Waste Workers

Not considering the whole picture (which includes comfort and adoption) results in a lack of compliance and, therefore, increased injuries.

All new vehicles under 10,000 pounds will be required by the NHTSA final rule to be equipped with rear-view technology as of 2018.

NHTSA Final Rule Requires Rear Visibility Technology

It applies to all new vehicles under 10,000 pounds by May 2018.

Congress, DOT Inspector General Eying Huge GM Recalls

General Motors CEO Mary Barra and David Friedman, acting NHTSA administrator, are scheduled to testify about the massive recalls April 1 at a House oversight subcommittee hearing.

Product Showcase

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

Featured

Artificial Intelligence

Webinars