Top Stories


International Process Safety Collaboration Announced

The Institution of Chemical Engineers and Texas A&M Engineering Experiment Station announced they have signed a Memorandum of Understanding.

OSHA Alleges 45 Willful Violations by NY Real Estate Developer, Issues $2.3M in Fines

Olivet Management LLC of Wingdale, N.Y., is cited for knowingly exposing workers to asbestos and lead during renovation work of the former Harlem Valley Psychiatric Center.

Amid Ebola Epidemic, WHO Delivers PPE for Guinea Health Workers

The geographic spread of cases so far, including in Conakry, the country's capital, makes this an unprecedented outbreak.



UK Food Standards Agency Changing Pork Inspection Rules

The Food Standards Agency has begun a six-week consultation on new rules for pork inspection rules that are set to be enacted in June 2014.

This memorial wall was erected to honor the 29 miners who died in the Upper Big Branch Mine South explosion on April 5, 2010. (MSHA photo)

WV Senator Denounces 'Upper Big Branch – Never Again' Documentary

Don Blankenship, former CEO of Massey Energy, had it made to challenge MSHA's conclusion that the explosion four years ago in which 29 miners died resulted from basic safety violations and was a coal dust explosion that started as a methane ignition.

PG&E Criminally Charged in San Bruno Pipeline Explosion

More than two years after NTSB concluded its inadequate quality assurance and quality control in 1956 during a pipeline relocation project caused the explosion, the utility faces 12 charges with potential penalties of $500,000 per charge.

OSHA Cites Company for Exposing Workers to Silica Dust

The agency has cited Grede Wisconsin Subsidiaries LLC for one repeat violation involving silica exposures.

London Fire Brigade: Most High-Rise Residents Lack Fire Plan

The brigade's survey found 60 percent of all high-rise residents -– approximately 760,000 households -– do not have a fire escape plan.

VA's Disability Claims Backlog Drops Sharply

The number of pending disability compensation claims peaked at more than 611,000 in March 2013, but the Department of Veterans Affairs has chopped it approximately 44 percent to 344,000 claims.

The welding arc creates extreme temperatures and may pose a significant fire and explosion hazard if safe practices are not followed. (The Lincoln Electric Company photo)

Be Prepared: Five Potential Welding Safety Hazards to Avoid

The welding arc creates extreme temperatures and may pose a significant fire and explosion hazard if safe practices are not followed.

This image comes from a video posted to DEUS Rescue

Incorporating Rescue Into a Fall Protection Plan

Standards should be the basis for any employer's fall protection and rescue program.

The purchasing manager tells me that since evaluating PPE selection beyond the mere paper value, they

Make No Haste in PPE Selection for Waste Workers

Not considering the whole picture (which includes comfort and adoption) results in a lack of compliance and, therefore, increased injuries.

All new vehicles under 10,000 pounds will be required by the NHTSA final rule to be equipped with rear-view technology as of 2018.

NHTSA Final Rule Requires Rear Visibility Technology

It applies to all new vehicles under 10,000 pounds by May 2018.

Congress, DOT Inspector General Eying Huge GM Recalls

General Motors CEO Mary Barra and David Friedman, acting NHTSA administrator, are scheduled to testify about the massive recalls April 1 at a House oversight subcommittee hearing.

Improved manufacturing processes have provided designers with the means to design a TPR exoskeleton that safeguards the user’s metacarpals and knuckles all the way to the tip of each finger without hindering mobility. (Mechanix Wear photo)

High Risk on the Rig

The primary objective is to eliminate hand exposure to pinch points, crush zones, and impact hazards.

Product Showcase

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. Read More

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. Read More

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More

Featured

Artificial Intelligence

Webinars