Top Stories


Martin Foundry Co. Cited for Workplace Lead Exposures

A judge issued a contempt order, forcing the Kansas City, Mo., company's owner to allow an OSHA inspection.

This stock image taken in 2012 shows part of the vast crowd at a holy site in Mecca during that year

More Than 25,000 Health Workers Ready to Aid Hajj Pilgrims

"We recognize the concerns that many have regarding infectious disease in today's environment, including the Middle East respiratory disease coronavirus. However, since the onset of the disease in 2012, there have not been any cases among hajj pilgrims, and we are working to keep it that way," said Khalid Al-Falih, minister of health of Saudi Arabia.

VW Admits 'Defeat Device' Software in 11 Million Vehicles Worldwide

"Discrepancies relate to vehicles with Type EA 189 engines, involving some eleven million vehicles worldwide. A noticeable deviation between bench test results and actual road use was established solely for this type of engine. Volkswagen is working intensely to eliminate these deviations through technical measures," the company's statement says.



New Ebola Drug Advances in Development

ASPR and BARDA are working together to fund a new monoclonal antibody drug.

No Drones Allowed During Papal Visits

Three U.S. cities will create no drone zones from Sept. 22 through Sept. 27.

What Does the Farmer's Almanac Say About the Coming Winter?

Every year around this time the Farmer's Almanac and the Old Farmer's Almanac (yes, there are two of them!) release their forecasts for the coming winter.

The Cray supercomputer allows the Swiss agency to create more detailed and more frequent daily weather forecasts.

Supercomputer Advances Swiss Center's Weather Forecasts

The CS-Storm has a peak performance of up to 15 teraflops per node and uses liquid cooling, so it places no additional load on room cooling, according to Cray. MeteoSwiss, the Swiss national weather and climate service, is using it to produce up to eight daily forecasts per day.

FAA Awards $11 Million to Airports Based on Runway Incursion Risk Factors

FAA's Runway Incursion Mitigation program aims to identify and mitigate risk factors that contribute to runway incursions at specific airports; the risk factors include unclear taxiway markings, lighting, or signage and confusing taxiway layout.

OSHA Cites Pier 1 for Hazards at Two Texas Sites

The cited violations involve forklift inspections and forklift operators' training.

Malaria Death Rates Fall Sharply: WHO

According to WHO, an increasing number of countries are on the verge of eliminating malaria: 13 countries reported zero cases of the disease and six others reported fewer than 10 cases in 2014.

The proposed labeling changes are one of the steps Health Canada is taking to further minimize the risk of liver damage and improve acetaminophen safety. (Carlos Yudica/Shutterstock.com photo)

Health Canada Proposes Acetaminophen Labeling Changes

A new drug facts table would provide dosing instructions, warnings, and other safety information in a quick-reference, easy-to-read format.

OSHA Cites Refinery Contractor After Heat Exposure Fatality

JV Industrial Cos. Ltd. faces $7,000 in fines in fines, the maximum allowed for a serious violation.

MSHA and Murray Energy Reach Settlement Over 1,753 Violations

Murray will pay $3.3 million in penalties, the agency announced.

DOL and HHS Expand Employment Opportunities for People with Disabilities

The Office of Disability Employment Policy and the Administration for Community Living signed a new memorandum of agreement

OSHA Updates Fire Protection Systems Manual

The 128-page "Fire Service Features of Buildings and Fire Protection Systems" manual explains how fire personnel can resolve an incident sooner and more safely if a building’s design is tailored to meet their needs during an emergency.

Product Showcase

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

  • Kestrel 5400 Heat Stress Tracker WBGT Monitoring for Workplace Safety

    Ensure safety with the Kestrel® 5400 Heat Stress Tracker, the go-to choice for safety professionals and endorsed by the Heat Safety & Performance Coalition. This robust, waterless WBGT meter is ideal for both indoor and outdoor environments, offering advanced monitoring and data logging essential for OSHA compliance. It features pre-programmed ACGIH guidelines and alert settings to quickly signal critical conditions. Integrated with the cloud-based Ambient Weather Network, the 5400 allows managers to view, track, and log job site conditions remotely, ensuring constant awareness of potential hazards. Its capability for real-time mobile alerts and remote data access promotes proactive safety management and workplace protection, solidifying its role as a crucial tool in industrial hygiene. Read More

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More

Featured

Artificial Intelligence

Webinars