Top Stories


The new hospital safety-related website

ACA Cutting Hospital Deaths, Report Shows

The reduction came about partly because of the ACA, which prioritizes efforts to prevent these infections, including through Medicare payment incentives to improve the quality of care and the HHS Partnership for Patients initiative.

FMCSA Issues Final Rule to Stop Driver Coercion

The rule is intended to protect truck and bus drivers from being forced by their employers or others to violate hours of service of safety regulations.

It was expected that participants who had the higher levels of training would be better able to adjust their gait patterns in advance of a slip or a trip. (Edward P. Fitts Department of Industrial and Systems Engineering, North Carolina State University photo)

The Importance of Worker Knowledge in Slips, Trips, and Falls and the Utility of Virtual Reality-based Locomotion Research

Virtual reality interfaces have the potential to be useful in gait/locomotion research and training, particularly for scenarios focusing on the risks of slips and trips.



Rutgers Opens Food, Nutrition and Health Center

"Overall, our mission is to make New Jersey that healthy state and a model for the nation. We believe that now is the time, and the institute is the place, to build a culture of health in our society," says Peter Gillies, Ph.D., founding director of the New Jersey Institute for Food, Nutrition and Health.

Incidents involving floor contaminants (wet or dry) aren

Review Floor Maintenance Procedures to Reduce Slip and Fall Incidents

Incidents involving floor contaminants (wet or dry) aren’t isolated to entrances or production areas.

Corvallis, Ore.-based VDOS Global uses aerial robotics and remote sensing to provide oil and gas inspections, environmental research, aerial surveying and other services using for its clients around the world. (VDOS image)

FAA Releases Drone Safety Checklist

With retailers busily advertising drones as a hot gift idea, the agency is urging consumers to make it a stocking stuffer this year.

Train all workers about the hazards and about maintaining clearance from overhead power lines.

Understand the Dangers of Electrical Shock

Electricity is one of the most common causes of fires and thermal burns in homes and workplaces.

Like bloodborne pathogens, hazardous chemicals can be present throughout a health care facility. Although it takes time to check each department, room, and closet, it really is one of the most effective ways to find materials that may otherwise be missed.

Health Care Hazmats: There's More On Site Than Just Bloodborne Pathogens

Sanitizing, disinfecting, and cleaning chemicals are likely to be found throughout the facility. It is important to know the particular brands and styles that are being used to verify that proper precautions are being taken.

Once a fabric has been manufactured, it should be inspected and tested for quality assurance and to ensure that the fabric meets or exceeds the ASTM and NFPA standards for flame resistance. (Mount Vernon FR photo)

Vertical Manufacturing of Flame-Resistant Cotton and Cotton-Rich Fabrics

Wear trials can help guide you in selecting the right fabric by providing a more comprehensive evaluation of important factors such as performance, comfort, and applicability.

The primary objective of outerwear in cold weather is to provide warmth. However, sub-zero work have the potential for exposure to an electric arc or a flash fire event.

How to Stay Safe and Stay Warm This Winter

The primary objective of outerwear in cold weather is to provide warmth. However, many sub-zero temperature industrial workplaces also have the potential for exposure to electric arc or a flash fire event.

The rule states that before an employee enters the space, the internal atmosphere must be tested with a calibrated direct-reading instrument for oxygen content, for flammable gases and vapors, and for potential toxic air contaminants.

Atmospheric Testing and the New OSHA Construction Confined Spaces Standard

Subpart AA of 29 CFR 1926 will help to prevent construction workers from being hurt or killed by eliminating and isolating hazards in confined spaces at construction sites.

Identifying employees who understand the duties and responsibilities of a first responder and who are seriously committed are key to your recruiting success and building a higher-performance response team that can execute under extreme pressure.

#1 Priority When Disaster Occurs: Everyone Goes Home

When an amazing safety-first culture exists, the result is a waiting list of employees wanting to be on the emergency response team.

The amount of exposure to individuals can depend upon work practices, ventilation, and location.

Welding Safety and Health Considerations

The amount of exposure to individuals can depend upon work practices, ventilation, and location. Will the work be done in wide open areas, inside a building adjacent to other work processes and people, or potentially even in a confined space?

"This worker literally came close to an early grave because the cemetery failed to provide proper excavation protections," said Anthony Ciuffo, OSHA

Grave Matter: OSHA Fines NY Cemetery Company for Cave-In

The agency cited St. John Cemetery Corp. for five violations, two classified as willful, after a worker was partially engulfed in May 2015 while in a grave opening.

Alabama Board Weighs Arc Fault Circuit Interrupter Measure

Indiana is the only other state that has amended AFCIs out of its building code, but a similar measure is currently pending in North Carolina, Jeffrey Sargent reported in the November/December NFPA Journal.

Product Showcase

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

  • AirChek Connect Sampling Pump

    Stay connected to your sampling with the SKC AirChek® Connect Sampling Pump! With its Bluetooth connection to PC and mobile devices, you can monitor AirChek Connect pump operation without disrupting workflow. SKC designed AirChek Connect specifically for all OEHS professionals to ensure accurate, reliable flows from 5 to 5000 ml/min and extreme ease of use. AirChek Connect offers easy touch screen operation and flexibility. It is quality built to serve you and the workers you protect. Ask about special pricing and a demo at AIHA Connect Booth 1003. Read More

  • Kestrel 5400 Heat Stress Tracker WBGT Monitoring for Workplace Safety

    Ensure safety with the Kestrel® 5400 Heat Stress Tracker, the go-to choice for safety professionals and endorsed by the Heat Safety & Performance Coalition. This robust, waterless WBGT meter is ideal for both indoor and outdoor environments, offering advanced monitoring and data logging essential for OSHA compliance. It features pre-programmed ACGIH guidelines and alert settings to quickly signal critical conditions. Integrated with the cloud-based Ambient Weather Network, the 5400 allows managers to view, track, and log job site conditions remotely, ensuring constant awareness of potential hazards. Its capability for real-time mobile alerts and remote data access promotes proactive safety management and workplace protection, solidifying its role as a crucial tool in industrial hygiene. Read More

Featured

Artificial Intelligence

Webinars