Top Stories


Avoid splashing with water to avoid contaminating the area around sinks with heavy metals. Wash the hands for at least 30 seconds and dry with disposable paper towels.

Hand Hygiene When Being Potentially Exposed to Heavy Metal Dust

It is important to recognize that hand washing cannot replace safe and hygienic work practices and the use of personal protective equipment when handling heavy metal-containing materials.

An industrial vacuum is ready to vacuum swarf from a pit. (Vac-U-Max photo)

Can an Industrial Vacuum Solve Confined Space Hazards?

From grain handling operations to heavy blast material, pit cleaning with vacuums allows workers to clean outside of confined space.

A follow-up phone call to 911 to advise them that you have a working fire will change the call type that they have dispatched and will ensure you are receiving the correct emergency response. This is even more crucial if you are dealing with any type of hazardous material on your property.

Real Threat or False Alarm: Are You Prepared for the Next Time the Fire Alarm Sounds?

Each type of alarm requires its own unique response, and a fire alarm is no different.



The Plan-Do-Check-Act model, which both DHS and FEMA use, really helps when implementing and practicing your emergency preparedness plans.

Getting Ready for Emergencies

The Plan-Do-Check-Act model, which both DHS and FEMA use, really helps when implementing and practicing your emergency plans.

Our optimum pH level is 5.5, which maintains our skin

More Than Barrier Protection, Single-Use Gloves Manage Skin Health

Skin health can be compromised from a continued cycle of hands going from a warm, wet glove interior to the rapid drying caused by evaporation when gloves are removed, and then back again.

CDC Funds Aid State and Local Health Departments

The new funding for antibiotic resistance also supports seven new regional laboratories with specialized capabilities allowing rapid detection and identification of emerging antibiotic resistant threats.

It can take as much as 24 hours for the body to absorb enough fluid to fully rehydrate. By using shirts and vests that incorporate active cooling on about 40 percent of the body surface, the danger of heat stress can be greatly reduced. (CoolShirt Systems photo)

How Cooling Boosts Productivity

Training and company policies must help employees decide that they can protect themselves from heat stress. Reducing heat stress will improve productivity and reduce accidents in the workplace.

If workers don

Time to Be All Eyes and Ears When it Comes to Protective Eyewear

Proper eyewear starts with making sure the PPE fits the task at hand. This often requires employers to conduct a workplace hazard assessment.

A Chemical Hygiene Plan is a "written program stating the policies, procedures, and responsibilities that serve to protect employees from the health hazards associated with the hazardous chemicals used in that particular workplace," according to OSHA.

Taking a Holistic Approach to Lab Safety

OSHA has required employers to develop a Chemical Hygiene Plan that addresses labeling as well as all other aspects of the Laboratory standard.

Padlocks should be standardized by size and color so that workers can easily identify function and ownership.

Six Tips to Improve Your Lockout/Tagout Program

A program that encourages communication can identify strengths and weaknesses much more efficiently than a program that remains static and unchanging after initial training.

First and foremost, we want the protective clothing to help prevent injuries to our workers and keep them safe. Second, we also want to improve morale and worker productivity.

Impact: Developing an Attitude for Safety

If workers are overly optimistic that no injuries will befall them, they may be more likely to take risks that could end up in injuries.

FAA Administrator Talks Safety at AirVenture

Michael Huerta discussed the importance of collaboration in Oshkosh, Wis.

Blue Bell Agrees to Follow Recognized Industry Standards

The standards to be followed are Sanitation Standard Operating Procedures (SSOPs); Good Manufacturing Practices (GMPs); a Pathogen Monitoring Program (PMP) for Lm that includes environmental, ingredient, and finished product testing; and a Hazard Analysis and Critical Control Points (HACCP) plan and/or a written Food Safety Plan.

Houston Contractor Violates Trench Requirements for Sixth Time in 10 Years

Oscar Renda Contracting faces $124K in OSHA penalties.

Tufts’ Patrick Collins reported that the early results "raise the possibility of optimizing patient-specific treatments" and show that using thread is a more flexible and less expensive option than substrates for implantable devices.

'Smart' Thread Collects Real-Time Diagnostic Data

Tufts University engineers headed a research team that integrated nano-sized sensors and electronics into simple threads.

Product Showcase

  • Safety Shower Test Cart

    The Safety Shower Test Cart speeds up and simplifies emergency shower tests, ensures you stay in compliance with OSHA regulations, and significantly reduces testing costs. With 7 unique features, the cart makes testing easy, effective, and efficient. You can test water clarity, flow, temperature, and spread—all at the same time! Most safety shower testing kits create a mess, take too much time to use, and don't fully help you stay in compliance with OSHA & ANSI standards. Transform the way you test emergency showers with Green Gobbler Safety. Read More

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

Featured

Artificial Intelligence