Top Stories


Portable Gas Detection

Safety should always be of the highest priority—it is the reason these detectors were invented, after all.

A well-run program is the best way to help ensure that your welders are protected from respiratory hazards. (3M photo)

Tips for Dealing with Respiratory Hazards in Welding

After identifying the hazards, the exposure levels from the exposure assessment must be compared to the permissible exposure limit, as set by OSHA, to determine whether respiratory protection is needed.

We congratulate the 22 winners in our tenth annual contest recognizing the most innovative new safety products.

2017 NPOY Contest Winners Honored

We congratulate the 23 winners in our ninth annual contest recognizing the most innovative new safety products.



Maryland Paid Leave Battle Lines Drawn

Gov. Larry Hogan this week unveiled the Paid Leave Compromise Act of 2018, saying it will be filed as emergency legislation and be ready on the first day of the legislative session starting in January. He vetoed HB1, the paid leave bill passed by the General Assembly, in May 2017.

To fight any fire effectively, the person operating the extinguisher must be able to move around easily and safely while holding the extinguisher. (Johnson Controls photo)

Get the Facts About Fire Extinguisher Selection

In tough, high-hazard environments, fire extinguishers are put to the test.

The 2016 standard was written to be scalable to meet the needs of both large and small companies with varying levels of technology present in their machinery and processes.

Controlling Hazardous Energy with Lockout/Tagout—Common Challenges and Best Practices

We have found that only about 10 percent of companies run effective lockout programs. In fact, we have observed that up to three-out-of-ten employers have no lockout program at all.

Many Protective Glasses Not Tested on Ultrafast Pulsed Lasers, NIST Warns

Many laser eyewear products are not being tested with ultrafast pulsed lasers, the type that increasingly supply light for biomedical applications and imaging, materials processing, industrial micromachining, and that means the eyewear may not provide adequate protection for the technical workers who depend on them, researchers found.

New Risk Research Institute Launched in Britain

The plan is for the institute's researchers to take lessons learned from four decades of incident investigations and research and make them accessible to industry, helping to ensure mistakes aren't repeated as new technologies and industries emerge.

Fourteen Appointed to HHS Tick-Borne Disease Working Group

HHS reports that Lyme disease accounts for the majority of tick-borne disease in the United States, and CDC estimates more than 300,000 people are diagnosed with Lyme disease annually, but only about 30,000 of those cases are reported to local and state health departments and to CDC.

DEA Restructuring Includes Louisville Field Division

The first new Field Division in nearly 20 years, it will be established on Jan. 1 and will include Kentucky, Tennessee, and West Virginia.

WHO Estimates 10 Percent of Developing Countries' Medical Products Falsified or Substandard

"Substandard and falsified medicines particularly affect the most vulnerable communities," said Dr. Tedros Adhanom Ghebreyesus, WHO's director-general. "Imagine a mother who gives up food or other basic needs to pay for her child's treatment, unaware that the medicines are substandard or falsified, and then that treatment causes her child to die. This is unacceptable. Countries have agreed on measures at the global level – it is time to translate them into tangible action."

2018 NFPA Fire Code Has Been Released

NFPA 1-2018 contains a new chapter on marijuana growing, processing or extraction facilities and another new chapter on cleaning and purging of flammable gas piping systems.

Insurance Agent Sentenced in Comp Fraud Case

The Washington state Attorney General's Office prosecuted the case as an aggravated offense because it happened over a long time and involved multiple acts as well as the loss of a large amount of money.

ASSE Seeking New Executive Director

"We welcome any nominations for executives who you believe would be a great fit for the role, as well as invite any interested parties to submit their resumes to the Korn Ferry team," said ASSE President Jim Smith, MS, CSP.

Another Oregon Company Graduates from SHARP

About 23 employer locations in Oregon participate in SHARP at this time, and about 157 additional employers have graduated from the program. An employer becomes a graduate when it completes five years of SHARP.

Product Showcase

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • Kestrel 5400 Heat Stress Tracker WBGT Monitoring for Workplace Safety

    Ensure safety with the Kestrel® 5400 Heat Stress Tracker, the go-to choice for safety professionals and endorsed by the Heat Safety & Performance Coalition. This robust, waterless WBGT meter is ideal for both indoor and outdoor environments, offering advanced monitoring and data logging essential for OSHA compliance. It features pre-programmed ACGIH guidelines and alert settings to quickly signal critical conditions. Integrated with the cloud-based Ambient Weather Network, the 5400 allows managers to view, track, and log job site conditions remotely, ensuring constant awareness of potential hazards. Its capability for real-time mobile alerts and remote data access promotes proactive safety management and workplace protection, solidifying its role as a crucial tool in industrial hygiene. Read More

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More

Featured

Artificial Intelligence

Webinars