Top Stories


Training programs always must focus on why it is never acceptable to take shortcuts and "work around" safety codes to complete a job more quickly. (Molex, LLC photo)

Utilizing Proper Technologies Key to Ensuring Electrical Safety

Adequate training, protection from exposure, and disciplined use of ground fault circuit interrupters are integral to keeping workers safe.

Most Emergency Response Plans read well on paper but have gaps that typically come to light only when a plant-wide drill is conducted to test the plan.

The Value of Realistically Testing Your ERP

Warning! This is a test. This is a test of the Emergency Response Plan.

Portable Gas Detection

Safety should always be of the highest priority—it is the reason these detectors were invented, after all.



A well-run program is the best way to help ensure that your welders are protected from respiratory hazards. (3M photo)

Tips for Dealing with Respiratory Hazards in Welding

After identifying the hazards, the exposure levels from the exposure assessment must be compared to the permissible exposure limit, as set by OSHA, to determine whether respiratory protection is needed.

Maryland Paid Leave Battle Lines Drawn

Gov. Larry Hogan this week unveiled the Paid Leave Compromise Act of 2018, saying it will be filed as emergency legislation and be ready on the first day of the legislative session starting in January. He vetoed HB1, the paid leave bill passed by the General Assembly, in May 2017.

We congratulate the 22 winners in our tenth annual contest recognizing the most innovative new safety products.

2017 NPOY Contest Winners Honored

We congratulate the 23 winners in our ninth annual contest recognizing the most innovative new safety products.

To fight any fire effectively, the person operating the extinguisher must be able to move around easily and safely while holding the extinguisher. (Johnson Controls photo)

Get the Facts About Fire Extinguisher Selection

In tough, high-hazard environments, fire extinguishers are put to the test.

The 2016 standard was written to be scalable to meet the needs of both large and small companies with varying levels of technology present in their machinery and processes.

Controlling Hazardous Energy with Lockout/Tagout—Common Challenges and Best Practices

We have found that only about 10 percent of companies run effective lockout programs. In fact, we have observed that up to three-out-of-ten employers have no lockout program at all.

The safety manager can instantly see, via his or her own smartphone, tablet, laptop, etc., which worker is using which detector. (Honeywell Industrial Safety photo)

Connect Workers and Technology for Safer, More Efficient Work Sites

Acquiring the latest software for safety management and monitoring can make a significant difference. The key is connected technology.

Many Protective Glasses Not Tested on Ultrafast Pulsed Lasers, NIST Warns

Many laser eyewear products are not being tested with ultrafast pulsed lasers, the type that increasingly supply light for biomedical applications and imaging, materials processing, industrial micromachining, and that means the eyewear may not provide adequate protection for the technical workers who depend on them, researchers found.

New Risk Research Institute Launched in Britain

The plan is for the institute's researchers to take lessons learned from four decades of incident investigations and research and make them accessible to industry, helping to ensure mistakes aren't repeated as new technologies and industries emerge.

Fourteen Appointed to HHS Tick-Borne Disease Working Group

HHS reports that Lyme disease accounts for the majority of tick-borne disease in the United States, and CDC estimates more than 300,000 people are diagnosed with Lyme disease annually, but only about 30,000 of those cases are reported to local and state health departments and to CDC.

DEA Restructuring Includes Louisville Field Division

The first new Field Division in nearly 20 years, it will be established on Jan. 1 and will include Kentucky, Tennessee, and West Virginia.

2018 NFPA Fire Code Has Been Released

NFPA 1-2018 contains a new chapter on marijuana growing, processing or extraction facilities and another new chapter on cleaning and purging of flammable gas piping systems.

WHO Estimates 10 Percent of Developing Countries' Medical Products Falsified or Substandard

"Substandard and falsified medicines particularly affect the most vulnerable communities," said Dr. Tedros Adhanom Ghebreyesus, WHO's director-general. "Imagine a mother who gives up food or other basic needs to pay for her child's treatment, unaware that the medicines are substandard or falsified, and then that treatment causes her child to die. This is unacceptable. Countries have agreed on measures at the global level – it is time to translate them into tangible action."

Product Showcase

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

Featured

Artificial Intelligence

Webinars