Top Stories


OSHA Cites Georgia Auto Parts Manufacturer, Proposes Maximum Penalties

OSHA has cited Georgia auto parts manufacturer HP Pelzer Systems Automotive Inc. for safety violations after an employee suffered a finger amputation.

Some industry groups have argued that the rule does not go far enough in protecting workers from exposure and have advocated for a PEL of 25 micrograms per cubic meter of air or lower.

Everything You Need to Know About OSHA's Respirable Crystalline Silica Final Rule

The agency estimates that the new rule will save more than 600 lives and prevent more than 900 cases of silicosis each year.

Proper technique is a skill rarely mastered or used by people in a dynamic work environment.

Keep Lifts Between the Knees and Shoulders

When lifting an object to above shoulder height, the core and stabilizer muscles become less efficient, so we change our body mechanics and the risk of shoulder injury increases dramatically.



All batteries, regardless of the type, discharge over time and need to be replaced or recharged.

AED and CPR Overview and Implementation for Special Cases

AEDs are simple to use. If you are a trained responder who finds someone unconscious and not breathing normally or not breathing at all, the procedure for use is simple.

It

Redefining Comfort: The Key to Understanding Non-Compliance

If we are going to truly redefine the comfort zone of today's worker, it will require technological advances to gloves along with improved education around safety practices and a far more thoughtful, proactive approach to changing behavior and breaking counterproductive habits.

These regulations will potentially have a very large impact on small and mid-sized employers.

What's Ahead for Respiratory Protection in 2018?

Here's what you need to know!

The system should only be deployed in low hazard laboratories. Maintaining a lab operational permit system with periodic checkups is advisable.

Controlling Ventilation Rates at University Research Laboratories

Laboratories' ventilation systems make up the majority of Northwestern University's electricity demand.

One-time use of marijuana is rarely detected in a urinalysis. The detection window must be very precise for this to occur.

Employers Must Put Safety First in a Drug-Friendly Culture

Marijuana is an impairing drug that has become substantially more potent since recreational use came into play, with some products containing upwards of 60 percent THC.

Understanding the habits of employees is the first step to encouraging higher hygiene and skin care standards. (DEB Group photo)

The Invisible Threat Lurking Under Gloves

Gloves should always fit the hands of the workers they belong to for best results. Skin care programs work the same way.

Look for manufacturers

Changing the Focus of Eye Safety in 2018

When we take a holistic view of eye safety by considering the manufacturer, the products and the individual workers who rely on them, we can make great strides toward reducing occupational eye injuries.

The requirement for risk assessments is one of the biggest changes in the new RIA standard. (Rockford Systems, LLC photo)

I, COBOT: The Rise of Industrial Robotics and the Need for Employee Safeguarding

In general, OSHA's view on robot safety is that if the employer is meeting the requirements of ANSI/RIA R15.06, the manufacturer has no issues.

Teamsters Ask UPS to Ban Drones, Driverless Vehicles

Teamsters Ask UPS to Ban Drones, Driverless Vehicles

The International Brotherhood of Teamsters' National Negotiating Committee submitted to UPS an 83-page document updating the prior agreement. In addition to the ban on drones and driverless vehicles, the union seeks the hiring of another 10,000 workers and halting deliveries after 9 p.m., including during the peak-delivery holiday season.

OSHA Cites Colorado Employers After Fatal Fire, Explosion

The explosion and fire occurred in Mead in May 2017 as employees were merging two tank batteries into a single tank battery operated by Anadarko Petroleum Corporation. OSHA inspectors found that flammable vapors or gases ignited as employees worked near pipes connected to a crude oil tank.

NIOSH Taking Comments on Research Agenda for Service Industries

The draft says suggested areas on which to focus research include same-level falls for food service workers; fatal injuries among installation, maintenance, and repair occupations; and motor vehicle injuries, falls, and struck by or against injuries among waste collection workers.

Health Canada Changes Security Rules for Medical Marijuana Producers

Current requirements that licensed producers maintain a high-security vault for storing cannabis products and that areas where cannabis is grown be under constant visual surveillance "do not align with the existing evidence of risks to public health and safety."

Product Showcase

  • AirChek Connect Sampling Pump

    Stay connected to your sampling with the SKC AirChek® Connect Sampling Pump! With its Bluetooth connection to PC and mobile devices, you can monitor AirChek Connect pump operation without disrupting workflow. SKC designed AirChek Connect specifically for all OEHS professionals to ensure accurate, reliable flows from 5 to 5000 ml/min and extreme ease of use. AirChek Connect offers easy touch screen operation and flexibility. It is quality built to serve you and the workers you protect. Ask about special pricing and a demo at AIHA Connect Booth 1003. Read More

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. Read More

  • Kestrel 5400 Heat Stress Tracker WBGT Monitoring for Workplace Safety

    Ensure safety with the Kestrel® 5400 Heat Stress Tracker, the go-to choice for safety professionals and endorsed by the Heat Safety & Performance Coalition. This robust, waterless WBGT meter is ideal for both indoor and outdoor environments, offering advanced monitoring and data logging essential for OSHA compliance. It features pre-programmed ACGIH guidelines and alert settings to quickly signal critical conditions. Integrated with the cloud-based Ambient Weather Network, the 5400 allows managers to view, track, and log job site conditions remotely, ensuring constant awareness of potential hazards. Its capability for real-time mobile alerts and remote data access promotes proactive safety management and workplace protection, solidifying its role as a crucial tool in industrial hygiene. Read More

Featured

Artificial Intelligence