Top Stories


World Standards Day 2018 Focused on Hazard Mitigation, Built Environment

ANSI and NIST hosted a World Standards Day 2018 event in Washington, D.C., on June 14 with expert discussions focused on codes and standards and their significant role in supporting strong, resilient 21st century infrastructure solutions.

NIOSH Publishes Final Research Agenda for Agriculture, Forestry, Fishing

The agenda document says during 2011-14, seafood processing workers experienced the highest injury/illness rate among all maritime workers: 6,286 injuries and illnesses per 100,000 workers, according to 2016 BLS data.

The rule will require employers to notify OSHA of work-related fatalities within eight hours and work-related in-patient hospitalizations, amputations, or an employee

Health Canada Regs Would Strengthen Surveillance of Drugs, Medical Devices

The proposed regulations would require hospitals to report all serious adverse drug reactions and medical device incidents, in writing, within 30 days of when the incident was first documented within the hospital.



AMA Delegates Adopt Several Gun Safety Measures

"People are dying of gun violence in our homes, churches, schools, on street corners, and at public gatherings, and it's important that lawmakers, policy leaders, and advocates on all sides seek common ground to address this public health crisis," said AMA Immediate Past President David O. Barbe, M.D., MHA.

SAMHSA Updates Toolkit to Help Prevent Opioid Deaths

The toolkit recommends that naloxone be made available to first responders and others who might respond to a possible overdose.

FRA Hosts First Positive Train Control Symposium

The agency will host two more this summer: July 16, focused on best practices for PTC system field testing and interoperability testing, and Aug. 20, focused on lessons learned and best practices for PTC Safety Plans.

NYC Department of Buildings Seeks 2019 Energy Code Advisory Committee Members

Applications from those seeking to be considered for 2019 Energy Code Advisory Committee membership must submit a completed application no later than June 21. Residential applications are especially needed, according to the department's posted announcement.

Nominations Being Accepted for 2018 Governor's Lifesaving Awards in Washington State

To be eligible, the life-saving incidents must have occurred during work hours and must have taken place between June 1, 2017, and May 31, 2018. The deadline for nominations is June 30.

OSHA Cites Wisconsin Contractor for Fall Hazards

"Employers are required to provide fall protection to employees working in construction at heights above 6 feet," said Robert Bonack, OSHA Appleton Area Office director. "This employer's repeated failure to comply with federal safety requirements exposes employees to fatal injuries from fall hazards."

Final Rule Will Streamline Bill Processing for Disabled Miners

The new regulations adopt industry-standard payment formulas derived from those used by Medicare and are similar to those used by other OWCP-administered compensation programs for federal employees, and the rule codifies the black lung program's current payment practice for prescription drug payments.

NSC Survey Finds 90 Percent of Employers Negatively Impacted by Employee Fatigue

NSC Survey Finds 90 Percent of Employers Negatively Impacted by Employee Fatigue

According to the council, 13 percent of workplace injuries can be attributed to fatigue. In the survey report, NSC identifies night shift and overtime scheduling, a lack of time off between shifts, and inadequate rest areas for employees within the workplace as some of the factors contributing to worker fatigue.

Safe Work Australia Publishes Guidance on Work-related Mental Health

The guide is built around three main sections: Preventing Harm, Intervening Early, and Supporting Recovery. It outlines a systematic approach to ensuring workers' psychological health and safety that revolves around the elements discussed in the three sections.

Will e-Manifests Make Life Easier or Harder for EHS Pros?

Will e-Manifests Make Life Easier or Harder for EHS Pros?

Advances in technology often simplify our lives and make our work day easier—will this be the case with e-Manifests? Or will the new electronic tracking system become a boondoggle for shippers, transporters, and receiving facilities?

NASA Successfully Flies Unmanned Plane in California

"This is a huge milestone for our Unmanned Aircraft Systems Integration in the National Airspace System project team," said Ed Waggoner, NASA's Integrated Aviation Systems Program director. "We worked closely with our Federal Aviation Administration colleagues for several months to ensure we met all their requirements to make this initial flight happen."

NFPA Stresses Electrical Safety Around Water for Summer

NFPA Stresses Electrical Safety Around Water for Summer

There are many electrical hazards in swimming pools, hot tubs and spas, on board boards, and in the waters surrounding boats, marinas, and launch ramps.

Product Showcase

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. Read More

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. Read More

Featured

Artificial Intelligence