Top Stories


OHSA Cites Tortilla Company after Employee Finger was Amputated

A tortilla company is cited and fined $81,682 for exposing employees to amputation hazards in Labelle, Florida.

Revised Z10 Standard Has Huge Impact on Safety Management

The Z10 system-based standard is committed to reducing workplace injuries, saving lives, and maximizing financial performance. As of late, ASSP released a revised ANSI/ASSP Z10.0-2019 standard.

Boeing Builds First Ever MQ-25 for the U.S. Navy

Boeing Builds First Ever MQ-25 for the U.S. Navy

An $805 million contract allowed Boeing to design the Navy’s first operational carrier-based unmanned aircraft. Now, it’s built and ready.



To Record or Not to Record: That Is the Question

There are often gray areas with injury and illness recordkeeping where it is not clear whether an injury meets the recording criteria, or in some cases, how and where the injury should be recorded.

After Trench Collapse, Colorado Utility Company Cited for Trenching Hazard Violation

RMS Utilities Inc. from Alamosa, Colorado is facing $92,819 in fines after employees were almost buried in a trench collapse.

Written Safety Plans: Your Top Questions Answered

To assist you in building your own full-service safety program, J. J Keller's trusted team of in-house subject-matter experts have compiled the ten questions they're most frequently asked regarding written safety plans below.

Livin

Livin' on the Edge

Leading edge applications require specialized fall protection solutions.

OH&S Announces Speaker Lineup for Safety Summit in Phoenix

Occupational Health & Safety is bringing the educational information found in its magazine to the event space with the OH&S Summit in Phoenix on October 29.

Safety Applies to Traveling Too: How Small Business Travelers Can Stay Healthy

Safety Applies to Traveling Too: How Small Business Travelers Can Stay Healthy

NIOSH recently released a resource guide that helps employers and managers ensure the safety of their employees before, during, and after their work travel trips.

National Safety Council Releases New Employer Opioid Toolkit for Worker Safety

NSC and launch partner, Stericycle, assembles resources for opioid epidemic after survey shows that 83 percent of employers are extremely unprepared to deal with employee opioid misuse.

Breathe Cleanly – Steps to Purify The Air In Your Home

Indoor air quality is one of the most common causes of complaints in offices. The EPA notes that concentrations of some pollutants are commonly two to five times higher indoors than outdoors - and Americans spend around 90 percent of their time indoors.

USDA Making Hog Slaughterhouse Jobs More Efficient—And Less Safe

A new rule proposed by the USDA to increase line speeds and reduce government inspections at U.S. hog slaughterhouses will likely cause increased workplace injuries and higher risk of foodborne illness.

The Dos and Don

The Dos and Don'ts of Atmospheric Testing

Common pitfalls to avoid with atmospheric testing in confined spaces.

Chicago Masonry Contractor Cited for Repeated Fall and Scaffolding Violations

Polo Masonry Builders Inc. has been cited for exposing employees to fall and scaffolding hazards while working on a building project. Now, the company has been placed in the Severe Violator Enforcement Program.

Federal Government Funds Program for Medication Safety and Opioid Use

Federal Government Funds Program for Medication Safety and Opioid Use

The U.S. Department of Labor renews its contract with a program through Coventry Health Care Workers’ Compensation Inc. The program will improve and expand medication safety for injured federal workers in an effort to fight opioid misuse.

Product Showcase

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More

  • EMSL Analytical, Inc. - Air Sampling Supplies & Testing Labs

    EMSL Analytical, Inc. operates laboratories throughout the United States and Canada. EMSL is a nationally recognized and locally focused provider specializing in fast laboratory results for Asbestos, Mold, Silica, Lead & Metals, Bacteria, Legionella, USP , Combustion By-Products, VOC’s, Radon, PCB’s, Formaldehyde, METH/Fentanyl, Identification of Dust & Unknowns. Sampling Pumps, Cassettes, Media & Supplies available. Reach us at 1-800.220.3675 Read More

Featured

Artificial Intelligence

Webinars