Top Stories


How to Deal with Employees in the Midst of a Pandemic

As countries are slowly starting to go back to the way things were and employees go back to the office, a problem most employers face is how to deal with their employees during these difficult times.

Washington Starts Process of Developing Wildfire Smoke Worker Safety Rules

Washington Starts Process of Developing Wildfire Smoke Worker Safety Rules

After a series of debilitating wildfires on the west coast, Washington is mapping out worker safety rules to protect employees from the dangerous effects of wildfire smoke.

Thousands of New Coronavirus Cases Set New U.S. Record

The new record number of cases surpassed 85,000.



Problems with Safety Management: Management and Practices Issues

OSHA standards are primarily focused on worksite conditions, so such exposures should be identified and addressed before workers are exposed to them.

Over One Hundred Businesses Cited and Fined by OSHA for Coronavirus Related Violations Since March

Many of the 112 citations have been given out in the month of October.

How Manufacturers Can Meet New Health and Safety Standards

As we all work together in the fight against the public health crisis, it’s imperative to continue to prioritize hygiene best practices in everyday operations.

Safety Speak: Target OSHA Citations, Flu Season, and When Will We See a COVID-19 Vaccine?

Episode 35

Safety Speak: Target OSHA Citations, Flu Season, and When Will We See a COVID-19 Vaccine?

In this Safety Speak episode of the podcast, we will discuss big box retailer Target’s OSHA citations, how pharmacies are preparing for the highly anticipated flu season and at the end, I will go in-depth on what we know about a possible COVID-19 vaccination and plans to administer it.

NIOSH Signs MOU with National Fire Protection Association

NIOSH Signs MOU with National Fire Protection Association

The National Institute for Occupational Safety and Health will work with the National Fire Protection Association to improve the safety of emergency responders using technology.

CCOHS Creates Online Safety Tool Kit for Employers

The tool kit was created to bridge the gap between expert information and employers to maximize employee safety.

Meatpacking Industry Voices Concerns about OSHA Citations

Meatpacking Industry Voices Concerns about OSHA Citations

The meatpacking industry feels that its employees are at risk of contracting COVID-19 after plant outbreaks.

Texas Teenager's Research Leads to Discovery of Potential Coronavirus Treatment

The Frisco teenager won $25,000 for her finding of a molecule that can bind to the spike protein of the SARS-CoV-2 virus.

Texas Assistant Professor Receives $10,000 Grant

Texas Assistant Professor Receives $10,000 Grant

UTSA assistant professor will use technology to help advance steel worker safety.

Hazard Communication: An Employer

Episode 34

OH&S SafetyPod: Hazard Communication — An Employer's Guide to Understanding HazCom

Hazard Communication has consistently sat near the top of OSHA’s Top 10 Most Frequently Cited Standards for quite a while now. To understand why, and dive a little deeper into the subject, I interviewed Stephen Badger, a safety management consultant with 34 years’ experience with Hazard Communication. Check out this episode to learn more about the history of the standard, the requirements to comply and how you can avoid citations.

OSHA Confirms Effectiveness of N95 Respirators in New FAQ

The misconception that coronavirus particles are too small to be filtered by the N95 respirator is corrected in the new set of Frequently Asked Questions.

States Submit COVID-19 Vaccine Plans to the CDC

States Submit COVID 19 Vaccine Plans to the CDC

States have unveiled their plans to distribute the coronavirus vaccine, which, as of yet, has not been approved by the FDA.

Product Showcase

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

Featured

Artificial Intelligence

Webinars