Articles


Understanding the Differences Between Construction and General Industry Confined Space Regulations 

Understanding the Differences Between Construction and General Industry Confined Space Regulations 

Because construction was specifically excluded from following the general industry confined space standard, OSHA would have to cite concerns in the construction industry under several different areas.

Leadership Mindset

High-level leadership has always been a heightened challenge; even more so during these times.

Confined Space 101: What You Need to Know About Fall Protection PPE 

Confined Space 101: What You Need to Know About Fall Protection PPE 

Planning, preparation and proper equipment is key to protecting confined space workers from fall hazards. 

As safety professionals, we need to always consider the electrical issue as it relates to lockout/tagout.  

Lockout/Tagout Can Save Lives

As safety professionals, we need to always consider the electrical issue as it relates to lockout/tagout.  

Building Boldly: Construction Responds to New Safety and Regulatory Realities

Building Boldly: Construction Responds to New Safety and Regulatory Realities

The construction industry continues to be the most dangerous in which to work in America.

 A Surge in Traffic Deaths Leads to the Creation of the Road to Zero Resolution

A Surge in Traffic Deaths Leads to the Creation of the Road to Zero Resolution

Although there were less people out and about during quarantine, traffic deaths spiked by 7.2 percent last year.

The CDC Guidelines are Changing Again to Protect Americans

The CDC Guidelines are Changing Again to Protect Americans

The delta variant is spreading at a rapid pace and causing COVID-19 cases to soar, leading the mask mandate to make a comeback.



Steps to Prevent Violence on the Job

Steps to Prevent Violence on the Job

The Illinois Department of Labor and OSHA highlight ways to address violence issues in the workplace.

NYC and California Reveal Plans to Require Vaccinations or Testing with Shots being Mandatory for Medical Workers

NYC and California Reveal Plans to Require Vaccinations or Testing with Shots being Mandatory for Medical Workers

The U.S. is seeing an increase in weekly COVID-19 cases due to the delta variant.

Focusing on Fatal Risk:  Why PSIFs Should be the Foundation  of Your Hazard Assessment

Episode 86

Focusing on Fatal Risk: Why PSIFs Should be the Foundation of Your Hazard Assessment

What's a PSIF and why is it so important to the safety of your facility? In this episode, Editor Sydny Shepard sits down with Fastenal's Joseph Solheid to define this term and describe how safety professionals can use it to their advantage.

U.S. Department of Labor Cites Dredging Manufacturer after Investigation into Worker’s Death

U.S. Department of Labor Cites Dredging Manufacturer after Investigation into Worker’s Death

OSHA investigation finds that safety procedures could have prevented the tragedy.

U.S. Department of Labor Cites Four Companies after Investigation shows Six Deaths were Preventable

U.S. Department of Labor Cites Four Companies after Investigation shows Six Deaths were Preventable

OSHA finds these companies have a total of 59 safety and health violations.

Americans See Steepest Decline in Life Expectancy Since WWII

Episode 85

Americans See Steepest Decline in Life Expectancy Since WWII

In this episode, Editor Sydny Shepard discusses a new partnership between NIOSH and ASA to protect temporary workers, new data on the latest decline in life expectancy and research that shows heat-related injuries might be significantly underreported.

A Roofing Contractor Violates its Agreement to Protect its Workers and Faces More Than $600K in Penalties

A Roofing Contractor Violates its Agreement to Protect its Workers and Faces More Than $600K in Penalties

Janiec Roofing Inc. does not comply with OSHA’s previous settlement agreement.

U.S. Life Expectancy Faced its Biggest Drop since WWII

U.S. Life Expectancy Faced its Biggest Drop since WWII

Life expectancy declined by an average of 1.5 years in 2020 for Americans.

Study Shows Heat Injuries in the U.S. are found to be Undercounted

Study Shows Heat Injuries in the U.S. are found to be Undercounted

Thousands of heat injuries across the country went unaccounted for.

U.S. Department of Labor Cites Three Employers at Missouri Residential Care Facility

U.S. Department of Labor Cites Three Employers at Missouri Residential Care Facility

OSHA claims three companies did not take the proper steps to contain potential residue containing asbestos.

Product Showcase

  • EMSL Analytical, Inc. - Air Sampling Supplies & Testing Labs

    EMSL Analytical, Inc. operates laboratories throughout the United States and Canada. EMSL is a nationally recognized and locally focused provider specializing in fast laboratory results for Asbestos, Mold, Silica, Lead & Metals, Bacteria, Legionella, USP , Combustion By-Products, VOC’s, Radon, PCB’s, Formaldehyde, METH/Fentanyl, Identification of Dust & Unknowns. Sampling Pumps, Cassettes, Media & Supplies available. Reach us at 1-800.220.3675 Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

Featured

Artificial Intelligence