Articles


OSHA Cites New Jersey Medical Facility and Staffing Agency for Exposing Nurses to COVID-19 Hazards

OSHA Cites New Jersey Medical Facility and Staffing Agency for Exposing Nurses to COVID-19 Hazards

After an investigation, it was found that there was unsafe respirator use while testing hundreds of people daily.

OSHA and NIOSH Partner up to Revise a Handbook for Small Businesses

OSHA and NIOSH Partner up to Revise a Handbook for Small Businesses

Their goal is to make it more detailed and provide even better safety tips for businesses.

Staying Safe on Construction Sites During the Summer

Staying Safe on Construction Sites During the Summer

As summer crawls on—amidst an influx in new construction projects that rival pre-pandemic levels—those in the construction industry are dealing with hazards that get more intense with each rising degree.

Worker Engulfment in Soybean Silo Leads to Citations of Central Illinois Grain Cooperative

Worker Engulfment in Soybean Silo Leads to Citations of Central Illinois Grain Cooperative

Topflight Grain Cooperative faces fines and citations for safety violations.

U.S. Department of Labor Cites Contractor for Electrical Death of Employee

U.S. Department of Labor Cites Contractor for Electrical Death of Employee

United Signs & Signals puts employee in harm’s way when failing to ensure electricity was secured.

The COVID-19 Delta Variant: What we Know so Far

The COVID-19 Delta Variant: What we Know so Far

The variant is spreading like a wildfire, fueling outbreaks across the U.S., mainly targeting those who are not vaccinated.

Electrical PPE Five Tips for a Successful Wear Trial

PREVIEW: September Issue

Electrical PPE Five Tips for a Successful Wear Trial

Many safety professionals are starting to realize that if they upgrade their programs to the new generation of products, wearer acceptance can increase dramatically.



What HVAC Workers Need to Know About OSHA

What HVAC Workers Need to Know About OSHA

On December 29, 1970, then-President Richard Nixon signed the Occupational Safety and Health Act. Four months later, on April 28, 1971, it went into effect, slowly becoming the gold standard for workplace safety today. 2021 marks the 50th anniversary of the act going into effect and it is still the primary thing that we turn to when safety is a concern.

Adapting Employee Drug Testing Programs for Remote Workers

Episode 89

Adapting Employee Drug Testing Programs for Remote Workers

In this episode, editor Sydny Shepard discusses the current COVID-19 outlook, how alcohol and substance use has shifted and what employers can be doing to manage all of it.

Engaging the Adult Learner

For many adults, sitting in a training classroom is something to be avoided at all costs. However, training is a necessary part of today's workplace. Companies must provide training to their employees. To help the reluctant learner, trainers can use a variety of techniques that will get the students interested and eager to participate in the training

OSHA Initiates Protection Over Texas, Oklahoma, Arkansas and Louisiana from Confined Space Dangers

OSHA Initiates Protection Over Texas, Oklahoma, Arkansas and Louisiana from Confined Space Dangers

After lives were taken in Texas and Oklahoma less than one year apart, OSHA decided it was time to intervene.

U.S. Department of Labor Intends to Protect Midwest Workers from Confined Space Hazards

U.S. Department of Labor Intends to Protect Midwest Workers from Confined Space Hazards

The Regional Emphasis Program was created to reduce employees’ harm when working in the transportation tank cleaning industry.

OSHA’s Safe + Sound Week Kicks off August 9 – 15, 2021

OSHA’s Safe + Sound Week Kicks off August 9 – 15, 2021

The campaign was created to encourage every workplace to have a safety and health program.

When Things Heat Up, Confined Spaces Can Become More Harrowing

When Things Heat Up, Confined Spaces Can Become More Harrowing

While not every confined space is hazardous, by its nature, confined spaces carry the potential to become dangerous – sometimes in a matter of seconds.

Understanding Silicosis & Finding the Proper Respiratory Protection

Episode 88

Understanding Silicosis & Finding the Proper Respiratory Protection

Silicosis impacts more workers than you may think. In this episode, editor Sydny Shepard sits down with CleanSpace Technology's Jon Imms to discuss what silica is and how safety professionals can protect against it.

Alliance is Formed to Keep Shipbuilders Safe from Dangerous, Hazardous Work Environments

Alliance is Formed to Keep Shipbuilders Safe from Dangerous, Hazardous Work Environments

OSHA is prioritizing a Mid-Atlantic shipyard industry to prevent a healthful workplace.

Ohio Contractor was Cited and Penalized for Exposing Construction Roofers to Deadly Fall Hazards Six Times Throughout the Past Three Years

Ohio Contractor was Cited and Penalized for Exposing Construction Roofers to Deadly Fall Hazards Six Times Throughout the Past Three Years

JHM Roofing LLC ignored OSHA’s citations due to repeated fall hazards over the past few years.

The Association Between Beliefs and Risk Management

The Association Between Beliefs and Risk Management

Many organizations devise operating systems that encompass values and standards specific to their core beliefs about work, people and performance.

8 Steps to Increase Safety and Strengthen Your LOTO Training Program

8 Steps to Increase Safety and Strengthen Your LOTO Training Program

Preventing injury and loss of life is undeniably the number one reason to strengthen any safety program. 

Product Showcase

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

Featured

Artificial Intelligence