Articles


State health commissioners continue to urge Americans who haven

California's 2013-14 Flu Deaths Reach 318

The 318 confirmed deaths statewide tripled the total number of flu deaths during the 2012-13 season, when 106 were reported.

About 25 percent of all on-duty firefighter fatalities occur while units are responding to or returning from incidents, and vehicle crashes cause most of the deaths, according to USFA.

USFA Releases Report on Emergency Vehicle Safety

The study is the latest one released by the FEMA agency since it published an "Emergency Vehicle Safety Initiative" in 2004.

MSHA Collaborating with National Stone, Sand and Gravel Association

Participants at a recent meeting discussed current actions being taken by the agency.

Two Convicted in Trade Secrets Case

A former DuPont employee and another defendant were found guilty of conspiring to steal trade secrets for its chloride-route titanium dioxide production technology and sell them to the People's Republic of China, the Justice Department announced.

Company Cited for Repeat Fall Hazards

OSHA has cited Coastal Building Systems with repeat fall hazards totaling over $50,000 in proposed fines.

DARPA Seeking Breakthrough Chemical and Biological Agent Detection Systems

The goal of the new LUSTER program is to create a new class of UV lasers that are more than 300 times smaller than current lasers and 10 times more efficient.

BSEE's FY2015 Budget Request Totals $204.6 Million

The amount will be offset by $123.6 million in BSEE collections.

OSHA asked for comments on its Process Safety Management standard, potential changes to PSM enforcement policies, and potential updates to its Explosives and Blasting Agents, Flammable Liquids and Spray Finishing standards.

OSHA Extends PSM Comment Period to March 31

The agency wants more input about a request for information published in December 2013 as part of the multi-agency process to improve chemical facility safety.



DOT's Proposed Budget Invests $90 Billion in Safe Transportation

The proposed plan would put $90.9 billion into safe and innovative transportation programs.

OSHA Cites Company Following Combustible Dust Explosion

The agency has cited Inferno Wood Pellet Inc. of East Providence, R.I., following a combustible dust wood explosion and fire.

Cheese Recalled for Possible Listeria

Roos Foods recalls even more cheese products for possible listeria contamination.

CDC Recommends Antibiotic Stewardship Programs for Hospitals

"Improving antibiotic prescribing can save today's patients from deadly infections and protect lifesaving antibiotics for tomorrow's patients," said CDC Director Dr. Tom Frieden, M.D., MPH.

The Oregon OSHA document covers the selection of head-to-toe PPE.

OR-OSHA Guide Explains PPE Selection for Applying Pesticides

It covers head-to-toe protection, including charts comparing the protection of various coverall types and chemical-resistant glove options.

NTSB to Offer March Safety Courses

The courses will cover interviewing, transportation disaster response, aircraft accident investigation, and more.

This CSB photo shows the aftermatch of the dust explosion and fire on Feb. 20, 2003, at the CTA Acoustics manufacturing plant in Corbin, Ky. killing seven workers.

Miller Still Pushing for OSHA Combustible Dust Rule

He proposed an amendment Feb. 27 to the All Economic Regulations Are Transparent Act (H.R. 2804) that would have exempted the regulation from the act's requirements, but it was defeated.

IMO Guidance Settles Security Training Quandary

It will solve the problem that many seafarers "were reportedly unable to have access to approved training courses or were unable to be issued certification of security-related training in accordance with the STCW regulations."

The Wanapum Dam is downstream from the Vantage Bridge, which is the Interstate 90 crossing over the Columbia River in Washington state. (Grant County Public Utility District photo)

Engineers Monitoring Crack in Columbia River Dam

Water levels above the Wanapum Dam are being reduced to 20 feet lower than the normal high operating level to reduce pressure on the spillway after divers found a 2-inch-wide crack that was 65 feet long in the base of one of the spillway piers.

MSHA Releases January Inspection Results

The agency releases the results of January inspections, which resulted in 198 citations.

The public has 45 additional days to file comments about the BSEE proposed rule affecting offshore oil and gas operations.

Comfort is the Secret to Success

Check for compatibility. It's important to have your employees suit up with all of their gear when fitting a hearing protector.

This image is a screen capture from a 2013 Bulwark video showing an arc and flash fire rated rain suit being exposed to a three-second flash fire. The test method depicted in the video is ASTM F 1930, which is the flame exposure test used in NFPA 2112 and ASTM F 2733.

The Importance of Specifying NFPA 2112 Certified Garments for Flash Fire Protection

The real question is, for you as a safety professional, how much is your “peace of mind” worth?

Product Showcase

  • AirChek Connect Sampling Pump

    Stay connected to your sampling with the SKC AirChek® Connect Sampling Pump! With its Bluetooth connection to PC and mobile devices, you can monitor AirChek Connect pump operation without disrupting workflow. SKC designed AirChek Connect specifically for all OEHS professionals to ensure accurate, reliable flows from 5 to 5000 ml/min and extreme ease of use. AirChek Connect offers easy touch screen operation and flexibility. It is quality built to serve you and the workers you protect. Ask about special pricing and a demo at AIHA Connect Booth 1003. Read More

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

Featured

Artificial Intelligence

Webinars