Articles


Dexterity needed on the job must be taken into account in glove selection, especially if workers are removing their gloves to complete high-dexterity tasks. (HexArmor photo)

Hand Safety Matters

When you begin a glove trial, it is important to consider as many application-specific issues as possible.

The San Diego Convention Center predicted last December that the center

Southern (California) Charm

One of OSHA's top concerns this year, the safety of temporary workers, is the focus of the Sept. 16 Occupational Keynote.

The facilities/maintenance department is a firsthand witness to many of a facility

Don't Forget the Lab

Accountability is the key, so get everyone involved in housekeeping.

Checking Out VPPPA's Big Show

We'll post reports from the national convention on our website, so be on the lookout during those late August days for items of interest about leadership keynotes and educational sessions.

Hand injuries from chemicals are a leading cause of injury in the cleaning industry.

Proper Use of Disinfectants

Use them sparingly. Many pathogens are becoming immune to some of the disinfectants and sanitizers previously used to eliminate them.

There is no continuous focus from the employers on realistically preparing, supervising, and protecting our workers before entry.

Beware of These Five Common Confined Space Myths

Test your knowledge and recognize the real threats.

Far Ultraviolet (UV-B&C) and Far Infrared (IR-B&C). Exposures at this level can impact the cornea through absorption.

Laser Safety: The Eyes Have It!

Eye injuries are of primary concern. The effect to the eye depends on various factors, including pupil size, pigmentation, laser pulse duration and repetition, and wavelength.

By selecting FR garments that provide protection and comfort, your workers will be more likely to wear them—and wear them appropriately.

FR Garment Comfort: Explaining the Mystery

It is extremely important to consider the three pillars of comfort—heat and moisture management; fabric hand; and garment fit/design—when evaluating your options.



Taking Back Leadership

Perhaps the worker hadn't alerted anyone in the company that he had past back issues. If not, why?

We could point to several mistakes that were made in this case, but the root cause does not belong entirely to the worker.

Lockout/Tagout Accident Investigation

We could point to several mistakes that were made in this case, but the root cause does not belong entirely to the worker.

Explosion at Tonawanda Coke Corp. Brings $161,100 in Fines

Workers allegedly were exposed to preventable fire, chemical and mechanical hazards.

DOT Issues New Rule for Transporting Lithium Batteries

The Pipeline and Hazardous Materials Safety Administration developed the rule, working closely with the Federal Aviation Administration.

As temperatures go up, rates of PPE compliance tend to go down. (CarbonX image)

If You Can't Stand the Heat

As temperatures go up, rates of PPE compliance tend to go down.

HSE

Three Reasons Why Construction Companies Fail When Trying to Predict Injuries

We need to change the mindset these machine-based methodologies must be viewed skeptically or cynically.

Workers Repeatedly Exposed to Amputation Hazards, OSHA Alleges

OSHA proposed fines of $111,650 following inspection at a Packaging Corporation of America facility.

Requirements for proper protective equipment may be overlooked in this booming industry. (Ansell photo)

Addressing Hand Protection Regulations in the Oil and Gas Industry

Requirements for proper protective equipment may be overlooked in this booming industry.

OSHA Issues $14K in Penalties in Fatal Cell Tower Collapse

The fines proposed against S and S Communication Specialists Inc. are the maximum amount possible -- $7,000 per serious violation -- in connection with the collapse of two towers in Clarksburg, W.Va., on Feb. 1, 2014.

Safe Workplaces Executive Order Draws Criticism

The president's Fair Pay and Safe Workplaces order will require that new federal contractors with contracts valued at more than $500,000 disclose labor law violations for the previous three years. The National Association of Manufacturers responded that this is "a dangerous game for our President to be playing with federal contracts."

MSHA Publishes Proposed Rule on Civil Penalty Assessments

The proposal aims to simplify the process and improve consistency, with an emphasis on more serious conditions.

This image is cropped from MSHA

MSHA's Respirable Dust Rule Taking Effect Aug. 1

Aug. 1 is the first compliance date for the new rule that lowers the allowable exposure of coal miners to respirable coal mine dust; some parts of the rule are being phased in for the next two years.

Product Showcase

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. Read More

Featured

Artificial Intelligence