Articles


A Simplified Method for Determining Residual Risk in RIA TR R15.306-2016

The combination of initial risk and risk reduction measures fixes the residual risk, thus simplifying the determination of residual risk and avoiding errors.

Most do not realize that slips and falls from the same surface are great risks.

Falls: The Battle with Gravity Can Be Costly

Falls impact more than the individual, so do what is prudent to reduce falls in your world and continue to educate yourself.

Where Should NIOSH Focus Its Robotics Research?

Work by NIOSH's new Center for Occupational Robotics Research certainly bears watching as the use of robotics rapidly increases in U.S. industries.

Some jobs, such as surveying, call for specific styles of high-visibility apparel. If you are specifying products for surveyors, a selection of safety vests that are optimized with mic tabs, pen slots, and other features designed especially for them will be welcome. (West Chester Protective Gear photo)

Five Questions Every Safety Manager Should Ask When Choosing High-Vis Apparel

Choosing the right high-visibility clothing for the job per the ANSI standard is a good first step to preventing injuries on a work site. But workers must use the garments and care for them.

Creating a Culture of Safety

Keeping safety top of mind is embedded within today's construction organizations and starts with strong leadership.

By June 1, 2016, OSHA expects all employers to be fully compliant with GHS adoption.

Using Chemical Management Software to Improve Communications and Prevent Incidents

Knowing exactly what employees are assigned to do can help break down any communication barriers.

The proposed PEL of 50 micrograms per cubic meter of air as an eight-hour time weighted average is half of the current PEL for quartz, the most common form of crystalline silica, in general industry and far below the now-obsolete PELs for crystalline silica applied to construction and shipyards.

Respirable Crystalline Silica: Regulations and Considerations

OSHA requires that engineering controls be used to achieve necessary exposure reductions unless infeasible; organizations may not simply issue respirators and "be done with" their attempts to lower exposures.

The data NIOSH researchers developed show that firefighters in turnout gear do not fit well in today

Updating the NORA Public Safety Agenda

Cardiovascular disease, cancer, and chronic diseases are the first recommendation because stress is such a big factor affecting public safety workers' health.



Preventative maintenance schedules also can be applied to procedures that help prevent slip, trip, and fall injuries. (New Pig photo)

Preventative Maintenance Tasks That Help Prevent Slips, Trips, and Falls

Most of these preventative maintenance techniques can be rolled into routine good housekeeping plans. Others can be incorporated into regular and periodic safety inspections.

New head protection models that offer a see-through visor on the bill of a hard hat is one way of allowing workers to see the hazards that may be lurking above them. (Bullard photo)

Avoiding Hazards

I have heard so many stories from workers who have credited wearing a hard hat with saving their lives.

Treating marijuana the same as alcohol is impossible for several reasons. There are no measurements for marijuana impairment that relate across the board to how we understand alcohol impairment.

The Far-Reaching, Positive Impact of Workplace Drug Testing

Given that the United States represents 5 percent of the world's population and consumes 60 percent of the world's supply of illicit drugs, drug testing can be seen as an investment against the cost of low productivity.

Managing an OSHA-compliant respiratory program today means understanding the risk of toxic substances and environments that are not only more prevalent for many workers, but very dangerous should they not be adequately protected. (Grainger photo)

Seven Respiratory Hazards Every Safety Manager Should Understand

Different equipment protects against different risks. Ensure your equipment matches the risk.

The CSB

Pre-Incident Planning for Hazmat Emergencies

One of the CSB's recommendations to FEMA following the explosion in West, Texas, was to fund training for fire departments on pre-incident planning for fires at facilities storing fertilizer grade ammonium nitrate.

Lifting Leadership

I urge leaders to do a "restraining forces audit," assessing what is blocking improvements in higher level Safety performance and culture.

Northgate Markets used the InfoLink® Fleet Management System to ensure operators were properly completing and documenting shift inspections and also to monitor lift truck impacts. (Crown Equipment photo)

Fleet and Operator Management Systems: A Valuable Tool in Your Forklift Safety Toolkit

It's not just about the quality of the training, but also the accessibility of the training.

Given an appropriate tool, the employee is far more likely to record an incident or near miss, particularly when the relevant training and supporting processes are put in place. (SHE Software photo)

Facing the Future: How Innovative Software is Changing the Face of EHS Systems

Empowering employees to take responsibility and to get on board with the safety journey is a proven method of increasing engagement levels.

The summer construction season means workers and safety managers must be prepared for heat stress, falls, puncture and crushing injuries, and noise exposures.

Three Questions to Ensure Continuous Improvement of Your Incident Reduction Strategy

An observation program is a critical process that will provide the data to identify what and where risks are occurring.

A Timeline of Safety Progress: Aligning Others and Minimizing Change Resistors

This template can help you communicate your company story throughout your organization.

Make a thorough assessment of all fall hazards, including sides and edges, hoist areas, and skylights. (MSA photo)

The Importance of Testing and Meeting Fall Protection Standards

Although ANSI standards are voluntary, they represent the consensus of industry experts and frequently provide more detailed product performance guidelines.

SWANA Launches Safety Toolkit for Solid Waste Haulers

The toolkit includes safety guidance and material such as the "5 to Stay Alive" safety tips and "Top 10 Backing Best Practices." There is also a Safety Pledge for workers to sign and a Pledge to Get Home Safe mini poster.

Product Showcase

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

  • EMSL Analytical, Inc. - Air Sampling Supplies & Testing Labs

    EMSL Analytical, Inc. operates laboratories throughout the United States and Canada. EMSL is a nationally recognized and locally focused provider specializing in fast laboratory results for Asbestos, Mold, Silica, Lead & Metals, Bacteria, Legionella, USP , Combustion By-Products, VOC’s, Radon, PCB’s, Formaldehyde, METH/Fentanyl, Identification of Dust & Unknowns. Sampling Pumps, Cassettes, Media & Supplies available. Reach us at 1-800.220.3675 Read More

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

Featured

Artificial Intelligence