Articles


ASSP Publishing ISO 45001 Implementation Handbook This Year

The handbook will provide small and medium-sized businesses with detailed guidance on how they can apply the voluntary consensus standard to increase employee safety, reduce workplace risks, and improve business outcomes.

NIOSH Researcher Named ACS Section's Chemist of the Year

Presented at the section's March 28 meeting at Miami University's Shriver Center in Oxford, Ohio, the award acknowledged Dr. Pramod Kulkarni's work in developing real-time, field-portable instruments that provide information on aerosols in workplace atmospheres.

FAA Proposes Revised Rules for Commercial Space Launches

The rule follows the National Space Council's 2018 "Space Policy Directive 2" that called on DOT to review and revise the department's commercial space launch and re-entry licensing regulations.

The impairment argument is incredibly complex. Many employers use the term in workplace drug and alcohol policies but this may not be the most prudent choice as marijuana impairment cannot necessarily be proven beyond a reasonable doubt.

West Virginia Governor Signs Cannabis Banking Bill

"I always have and I always will fully support medical cannabis for our people who are in so much pain that their physicians deem it absolutely necessary," Gov. Jim Justice said. "I will say, adamantly, I am one hundred percent against recreational marijuana."

Wireless technology can be a game changer for confined space entries by notifying the attendant of changes in the environment before the entrant is aware of the change. (Industrial Scientific photo)

Know Before You Go: Tips on Atmospheric Monitoring for Confined Spaces from the Training Experts

All hazards must be identified before entry to the space and listed on the permit.

Welders should not weld in confined spaces without ventilation, and they may require respiratory protection if ventilation and the work practices being employed fail to reduce exposures to safe levels.

Welders' Protection By the Book

The protective measures and equipment that welders require are spelled out in OSHA's 29 CFR 1910.252, the welding, cutting, and brazing standard.

AVTs use an automated process and single step activation, standardizing the process to avoid missteps in execution and sequence, and they are designed to be robust and fail-safe, with numerous reliability features.

Listing Requirements Help Absence-of-Voltage Testers Become a Better Way to Prevent Workplace Injuries

AVTs help reduce the risk of exposure to electrical hazards and improve worker safety by automating and simplifying the process of verifying the absence of voltage.

The most encouraged exercise for reducing eye strain is the 20-20-20 rule. Every 20 minutes, you should focus on something at least 20 feet away for at least 20 seconds.

Four Simple and Effective Ways to Avoid Digital Eye Strain

Eye care professionals strongly recommend taking breaks throughout the workday to reduce eye fatigue and unnecessary eye strain.



With a switch-rated connector system, the plug being separated from the receptacle provides visual proof that power has been removed and displays fast and positive compliance with NEC requirements for de-energizing industrial equipment. (Molex, LLC photo)

Taking the Guesswork Out of De-Energizing Industrial Equipment

New solutions expedite the lockout/tagout process and provide clear line-of-sight disconnect for operators.

OSHA, under 29 CFR 1910.157, requires that anyone who may be expected to use a fire extinguisher in the workplace be trained in their use.

Fire Safety: Prevention and Protection in the Office

Accounting for employees in the event of an emergency is vital. The Emergency Action Plan should address how to accurately account for all employees.

Auto plant workers are exposed to a variety of harsh environments that require all-over protective gear.

PPE the Automotive Industry Needs to Invest In

Training workers is vital in making sure the PPE is doing its job in protecting the users.

Don't Be at Risk

Job applicants cannot be and should not perceive being disqualified solely based on the existence of a medical condition.

Anatomy of a Failing Leader

Best leaders watch and avoid falling into leadership potholes while steadily moving toward better Safety and performance.

Taking Aim at Rail Trespasser Casualties

More people are struck and killed by trains each year while trespassing than in motor vehicle collisions with trains at highway-rail grade crossings.

Fire codes and OSHA regulations require emergency exit paths to remain clear at all times. Large shipments, construction, demolition, and temporary needs don’t negate this requirement.

Eliminate 10 Fire Hazards That May Be in Plain Sight

Smoke alarms, carbon dioxide detectors, and hazardous gas sensors need to be tested and sometimes calibrated regularly to ensure they will function properly when needed.

Washington Hospital Cited for Failing to Protect Workers from Assaults

The Washington Department of Labor and Industries has cited and fined Washington state's largest state-run psychiatric hospital for failing to protect employees from assaults by patients.

California's Governor Criticizes PG&E Over Board Plans

Gov. Gavin Newsom's letter criticized what he described as the company's plans "to reconstitute its board with hedge fund financiers, out-of-state executives and others with little or no experience in California and inadequate expertise in utility operations, regulation and safety."

NYC Mayor Cutting City's Vehicle Fleet

The city will eliminate least 1,000 vehicles from its fleet by June 2021 and will reduce the number of take-home vehicles by at least 500 vehicles, curtail the reliance on SUVs in the city fleet, and promote increased vehicle efficiency by using advanced data collection.

NIOSH and Partners Release New Resource on First Responder Exposure Risks

NIOSH and partners released a new video to help first responders understand the risks of occupational exposures to illicit drugs and what they can do to protect themselves from exposure while responding to an emergency.

ATRI Board Approves 2019 Research Agenda

The research topics cover several critical industry issues, including truck parking, younger driver safety, the return on investment of new truck safety technologies, and the impact of "nuclear" verdicts on the trucking industry.

Product Showcase

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

Featured

Artificial Intelligence

Webinars