Articles


Scaffolding, Roofs, Ladders, and More: 6th Annual Stand-Down Almost Here

CPWR has posted many resources on its Stand-Down website, including a five-day plan for getting workers to focus on falls during the week. Among the suggestions the organization makes are to use CPWR-NIOSH infographics, CPRW fatality maps, and NIOSH and state Fatality Assessment and Control Evaluation reports to focus workers' attention on identifying fall hazards.

U.S., Peru Sign Agreement to Enhance SAR Capabilities

This is the first binding SAR agreement between the United States and a South American country and will serve as the basis for future bilateral cooperation and coordination.

Community Risk Reduction is defined in NFPA 1035 as "programs, actions, and services used by a community, which prevent or mitigate the loss of life, property, and resources associated with life safety, fire, and other disasters within a community."

Maryland's Governor Signs Two Firefighters Benefits Bills

House Bill 595 adds bladder and kidney, or renal cell cancers to the types of cancers considered as occupational diseases for firefighters under the workers' compensation law. The other bill will expand workers' compensation coverage by closing loopholes regarding cumulative time served.

Faulty Materials Caused Two Launch Failures: NASA

"Due in large part to the hard work and dedication of many highly motivated people in the NASA Launch Services program, we are able to close out the cause of two extremely disappointing launch vehicle failures and protect the government aerospace supply chain," said Amanda Mitskevich, LSP program manager at NASA's Kennedy Space Center.

DOT Announces Appointment of Maritime Advisory Committee Members

"The insights, experience, and perspectives of these committee members are essential to federal transportation decision-making," said federal Maritime Administrator Mark H. Buzby. "The MTSNAC is a strategic resource needed to strengthen and re-energize the maritime industry."

One of the easiest ways to monitor safety metrics is by using a safety management software. As you improve your safety performance analysis, you’ll need a system that can handle the influx of data, give you access to real-time metrics, and help you glean valuable insights hidden within the flood of information.

How to Conduct a Safety Inspection Remotely

Remote inspections can be an alternate and effective way to conduct a safety inspection.

By June 1, 2016, OSHA expects all employers to be fully compliant with GHS adoption.

Chemical Management: Five Ways to Meet the Challenges of IH in a Changing Industry

The most robust software solutions feature ingredient indexing to help you track chemical ingredients across products while flagging those that are subject to more stringent regulatory standards.

London Fire Brigade Trying to Change Minds on Sprinklers

Sprinklers are present in just 1 percent of the incidents at care homes, retirement homes, and hostels to which Brigade fire crews respond; of the 428 fires responded to by London firefighters at such facilities during 2017, only five of the facilities had fire sprinklers.



Test manikin before exposure, dressed in non-inherent shirt and inherent pants. (DuPont Protection Solutions photo)

New Considerations for Selecting Flame-Resistant Workwear

In a real-world fire emergency, chances are that workers will need to flee to safety, so it is critical that FR workwear continue to provide coverage and allow mobility to protect workers after a flash fire or arc flash.

The last thing first responders need is a false pass on their respiratory protection fit. (OHD, LLLP photo)

Why Respiratory Protection and Fit Testing Matter

I cannot stress enough how important it is for all first responders to always wear respiratory protection on the fireground—even after the fire is out.

Excessively hot or cold water temperatures in safety showers and eyewashes can exacerbate the very injuries the safety equipment is designed to reduce. (Haws Corporation photo)

Best Practices When Procuring, Placing and Maintaining Your Emergency Eye/Face Wash and Showers

It is critical to ensure that the equipment is functioning properly and highly visible in case of an emergency.

A written respiratory protection program must be implemented that meets all of the requirements of 29 CFR 1910.134. (3M Personal Safety Division photo)

Why Pick a PAPR?

PAPRs are useful and often necessary in many types of hazardous jobs and conditions.

The primary causes of heat stress are poor hydration, lack of shade, and lack of rest breaks, not clothing. (Tyndale Company photo)

The Truth About Heat Stress and FRC

It would be a terrible shame to put American workers at risk of catastrophic or fatal burn injury because of an outdated myth about PPE and heat stress.

This CSB photo shows the aftermath of the Imperial Sugar plant explosions in 2008 and is found in the U.S. Chemical Safety and Hazard Investigation Board

Towards Compliance: NFPA 652 Standard on the Fundamentals of Combustible Dust

If explosion preventive measures alone cannot reduce the risk of a dust cloud explosion to an acceptable level, then explosion protection measures must be considered.

Championing Safety

Championing Safety works best when leaders from senior management and worker levels simultaneously come together to spearhead change. This is a proven way to significantly elevate injury prevention performance and culture.

Stress in the World of Industrial Hygiene: Is It Understood?

How does stress affect an employee's health to the point that we need to take it into consideration when evaluating their working environment? Should stress be included in the evaluation to management as a matter of concern?

Fire Safety: Plan, Prevent, Train, Recover

Fires have the highest casualty rate of workplace accidents, but there are ways to mitigate risk.

The LEED-certified, 1.6 million-square-foot Minneapolis Convention Center features 475,000 square feet of exhibit space and 87 meeting rooms. (Minneapolis Convention Center photo)

Underestimated No More

The conference's opening session will feature keynote speaker Carey Lohrenz, the first female F-14 Tomcat fighter pilot in the U.S. Navy, speaking on "Lessons in Leadership."

Chemical Protective Clothing Selection—Finding the Best Match for Your Hazard

You should strive to gather permeation data for the CPC you plan to use against your actual workplace chemicals.

Wage and Hour Concludes Service Providers for Virtual Marketplace Company Are Independent Contractors

To make the determination, WHD applied what DOL described as "its longstanding and unchanged six-factor balancing test, derived from Supreme Court precedent."

Product Showcase

  • Full Line of Defense Against Combustible Dust Nilfisk

    Nilfisk provides a comprehensive range of industrial vacuums meticulously crafted to adhere to NFPA 652 housekeeping standards, essential for gathering combustible dust in Class I, Group D, and Class II, Groups E, F & G environments or non-classified settings. Our pneumatic vacuums are meticulously engineered to fulfill safety criteria for deployment in hazardous surroundings. Leveraging advanced filtration technology, Nilfisk ensures the secure capture of combustible materials scattered throughout your facility, ranging from fuels, solvents, and metal dust to flour, sugar, and pharmaceutical powders. Read More

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

  • EMSL Analytical, Inc. - Air Sampling Supplies & Testing Labs

    EMSL Analytical, Inc. operates laboratories throughout the United States and Canada. EMSL is a nationally recognized and locally focused provider specializing in fast laboratory results for Asbestos, Mold, Silica, Lead & Metals, Bacteria, Legionella, USP , Combustion By-Products, VOC’s, Radon, PCB’s, Formaldehyde, METH/Fentanyl, Identification of Dust & Unknowns. Sampling Pumps, Cassettes, Media & Supplies available. Reach us at 1-800.220.3675 Read More

Featured

Artificial Intelligence

Webinars