Articles


Vermont Governor Announces Second Round of Hazard Pay for Essential Workers

Workers who meet the set requirements could receive up to $2,000 in hazard pay.

British Study Outlines Lowered Strength of Coronavirus Antibodies

British Study Outlines Lowered Strength of Coronavirus Antibodies

A British study that began in June reveals that COVID-19 antibodies do not have a lasting effect toward immunity.

Catering to Employee’s Mental Health Amid the Coronavirus Pandemic

Employee mental health has suffered as the stress caused by the coronavirus pandemic has affected worker’s personal and professional lives.

How to Deal with Employees in the Midst of a Pandemic

As countries are slowly starting to go back to the way things were and employees go back to the office, a problem most employers face is how to deal with their employees during these difficult times.

Washington Starts Process of Developing Wildfire Smoke Worker Safety Rules

Washington Starts Process of Developing Wildfire Smoke Worker Safety Rules

After a series of debilitating wildfires on the west coast, Washington is mapping out worker safety rules to protect employees from the dangerous effects of wildfire smoke.

Thousands of New Coronavirus Cases Set New U.S. Record

The new record number of cases surpassed 85,000.

Problems with Safety Management: Management and Practices Issues

OSHA standards are primarily focused on worksite conditions, so such exposures should be identified and addressed before workers are exposed to them.

Over One Hundred Businesses Cited and Fined by OSHA for Coronavirus Related Violations Since March

Many of the 112 citations have been given out in the month of October.



How Manufacturers Can Meet New Health and Safety Standards

As we all work together in the fight against the public health crisis, it’s imperative to continue to prioritize hygiene best practices in everyday operations.

Safety Speak: Target OSHA Citations, Flu Season, and When Will We See a COVID-19 Vaccine?

Episode 35

Safety Speak: Target OSHA Citations, Flu Season, and When Will We See a COVID-19 Vaccine?

In this Safety Speak episode of the podcast, we will discuss big box retailer Target’s OSHA citations, how pharmacies are preparing for the highly anticipated flu season and at the end, I will go in-depth on what we know about a possible COVID-19 vaccination and plans to administer it.

NIOSH Signs MOU with National Fire Protection Association

NIOSH Signs MOU with National Fire Protection Association

The National Institute for Occupational Safety and Health will work with the National Fire Protection Association to improve the safety of emergency responders using technology.

CCOHS Creates Online Safety Tool Kit for Employers

The tool kit was created to bridge the gap between expert information and employers to maximize employee safety.

Meatpacking Industry Voices Concerns about OSHA Citations

Meatpacking Industry Voices Concerns about OSHA Citations

The meatpacking industry feels that its employees are at risk of contracting COVID-19 after plant outbreaks.

Texas Teenager's Research Leads to Discovery of Potential Coronavirus Treatment

The Frisco teenager won $25,000 for her finding of a molecule that can bind to the spike protein of the SARS-CoV-2 virus.

Texas Assistant Professor Receives $10,000 Grant

Texas Assistant Professor Receives $10,000 Grant

UTSA assistant professor will use technology to help advance steel worker safety.

Hazard Communication: An Employer

Episode 34

OH&S SafetyPod: Hazard Communication — An Employer's Guide to Understanding HazCom

Hazard Communication has consistently sat near the top of OSHA’s Top 10 Most Frequently Cited Standards for quite a while now. To understand why, and dive a little deeper into the subject, I interviewed Stephen Badger, a safety management consultant with 34 years’ experience with Hazard Communication. Check out this episode to learn more about the history of the standard, the requirements to comply and how you can avoid citations.

OSHA Confirms Effectiveness of N95 Respirators in New FAQ

The misconception that coronavirus particles are too small to be filtered by the N95 respirator is corrected in the new set of Frequently Asked Questions.

States Submit COVID-19 Vaccine Plans to the CDC

States Submit COVID 19 Vaccine Plans to the CDC

States have unveiled their plans to distribute the coronavirus vaccine, which, as of yet, has not been approved by the FDA.

Target Corp. Enters Settlement Agreement with OSHA

The retail company will pay $464,750 in penalties for storage hazards and safety violations in stores.

CVS Health to Hire Thousands of Pharmacy Workers this Winter

CVS Health to Hire Thousands of Pharmacy Workers this Winter

The additional hires will help the influx of patients that will contract the flu or coronavirus as temperatures drop and the number of illnesses across the country rise.

Product Showcase

  • Safety Shower Test Cart

    The Safety Shower Test Cart speeds up and simplifies emergency shower tests, ensures you stay in compliance with OSHA regulations, and significantly reduces testing costs. With 7 unique features, the cart makes testing easy, effective, and efficient. You can test water clarity, flow, temperature, and spread—all at the same time! Most safety shower testing kits create a mess, take too much time to use, and don't fully help you stay in compliance with OSHA & ANSI standards. Transform the way you test emergency showers with Green Gobbler Safety. Read More

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

Featured

Artificial Intelligence