Articles


Avoid splashing with water to avoid contaminating the area around sinks with heavy metals. Wash the hands for at least 30 seconds and dry with disposable paper towels.

CDC Investigations Find Common Sources of Health Care Infections

"Everything here is water-related, which tends to be the case with health care," said Bryan E. Christensen, an industrial hygienist and epidemiologist with CDC's National Center for Emerging and Zoonotic Infectious Diseases. "There really needs to be an increased role for the industrial hygiene field at health care facilities. It's something that needs more emphasis going forward."

Predicting Worker Fatigue

Sean Kerklaan of Fatigue Science held a session on the importance of sleep, and how to improve it for workers.

A Close Look at Hearing Loss

Scott Brueck of NIOSH evaluated the effect of noise on hearing loss at a hammer forge company.

New Initiatives for Lead Exposure in Vietnam

A study looked at the village of Dong Mai, which created an industry out of recycling batteries and thus an overexposure to lead.

Visitors may want to use the Washington State Ferries to travel from the Seattle waterfront to Bainbridge Island and other stops.

Zika, Ebola Updates Provided at AIHce 2017

Only three occupational cases of mosquito-borne Zika virus transmission have been recorded in the United States, a NIOSH presenter said June 5.

Federal Enforcement Still Weak, NPR's Berkes Says

Having investigated the Upper Big Branch mine disaster, grain bin deaths, and the erosion of workers' compensation protections, he says the agencies and prosecutors don’t enforce strongly enough, and workers suffer.

NASA Revealing New Astronaut Class This Week

About 18,300 people applied more than a year ago, and the agency is announcing the new group in a live broadcast June 7 from the Johnson Space Center.

Predicting Worker Fatigue

Sean Kerklaan of Fatigue Science held a session on the importance of sleep, and how to improve it for workers.



Topics in Construction Discussed at AIHce Expo

A number of presenters discussed EHS issues and how they crop up in the construction work place.

AIHA Invites OEHS Members to Present at AIHce 2018

The association is looking for experts in industrial hygiene and occupational and environmental health and safety to submit proposals.

The Washington State Convention Center is located in downtown Seattle and hosts AIHce 2017. (Washington State Convention Center photo)

AIHce 2017 Under Way in Seattle

At this year’s AIHce EXP conference, the themes include questions about the IH profession’s future and the newest real-time detection technologies available from industry manufacturers.

3M Awards 2017 OHS Scholarships

The three winners were honored during a June 4 reception at the AIHce conference.

The 2017 Public Safety Broadband Stakeholder Meeting will begin June 12 at the Marriott Rivercenter in San Antonio.

2017 Public Safety Broadband Stakeholder Meeting Starts June 12

The three-day annual event hosted by NIST’s Public Safety Communications Research Division is taking place at the Marriott Rivercenter in San Antonio.

OSHA Announces Inaugural 'Safe + Sound Week'

The event will help raise awareness of safety and health programs for stakeholders.

NSC: Preventable Deaths Increase during Summer Months

Americans have been encouraged to make safety resolutions and break bad habits.

PHMSA Panel Meeting Next Week on Integrity Management Rule

The proposed Safety of Gas Transmission and Gathering Pipelines rule would set new IM requirements for these pipelines that are not in high consequence areas (HCAs), and it proposes a new "moderate consequence areas" definition.

Canada Renews Western Waste Management Facility Operating License

The renewed license authorizes construction of new facilities, including storage buildings for low- and intermediate-level waste, in‑ground storage containers for intermediate-level waste, in-ground containers for heat exchangers, and storage buildings for used dry nuclear fuel.

OSHA Finds Safety Failures in Fatal Incident Investigation

OSHA has issued a dozen fines following the investigation into a Pensacola-area electric cable manufacturer.

Look for a gas detection vendor that supports communication across the gas detection fleet, spanning personal and area monitors. (Industrial Scientific Corporation photo)

OnStar for Your Gas Detection Program

How are organizations leveraging historical and real-time data to keep workers safe? As with auto safety systems and services, one type of data isn't enough for your gas detection program.

Welcome Changes for ASSE

Look for the rebrand to start rolling out in the first quarter of 2018 with a refreshed website.

Product Showcase

  • EMSL Analytical, Inc. - Air Sampling Supplies & Testing Labs

    EMSL Analytical, Inc. operates laboratories throughout the United States and Canada. EMSL is a nationally recognized and locally focused provider specializing in fast laboratory results for Asbestos, Mold, Silica, Lead & Metals, Bacteria, Legionella, USP , Combustion By-Products, VOC’s, Radon, PCB’s, Formaldehyde, METH/Fentanyl, Identification of Dust & Unknowns. Sampling Pumps, Cassettes, Media & Supplies available. Reach us at 1-800.220.3675 Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

Featured

Artificial Intelligence