Wikoff Color Corp. Fined for Safety Violations Leading to Employee Burn Injuries

Wikoff Color Corp. Fined for Safety Violations Leading to Employee Burn Injuries

The company initially faced $183,207 in proposed penalties for its 12 serious violations.

An OSHA investigation into Wikoff Color Corp., an international ink and coatings manufacturer, resulted in the identification of safety violations. Following a serious safety incident at its Lisbon, Wisconsin facility, the company faced penalties amounting to $183,207, ultimately agreeing to pay $110,000 following an informal conference with the agency.

According to a recent release, the worker sustained first- and second-degree burns from a flash fire while manually adding combustible powder ingredients to an industrial mixing vessel containing flammable liquids and vapors in January 2024. OSHA determined the fire ignited inside the mixing vessel and the flames escaped through the charging port, resulting in injury.

“A worker suffered severe and painful injuries needlessly because Wikoff Color Corp. did not follow federal safety and health regulations designed to protect workers when handling highly hazardous chemicals,” OSHA Area Director Dustin Schnipke in Milwaukee said in a statement. “This company has been in business far too long to expose employees to hazards that can be reduced by using proper procedures and training employees to ensure safe working conditions for all.”

Investigators identified that Wikoff Color Corp. failed to adhere to the Process Safety Management (PSM) requirements for the safe handling of highly hazardous chemicals. The company was cited for 12 serious violations, also including failure to provide effective training on the hazards of flammable liquids and combustible dust and exposing workers to fall hazards.

About the Author

Robert Yaniz Jr. is the Content Editor of Occupational Health & Safety.

Product Showcase

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

Featured

Artificial Intelligence

Webinars