OSHA Identifies Safety Violations at 2 Florida Construction Contractors

OSHA Identifies Safety Violations at Florida Construction Contractors

The crane safety failures led to a fatal incident on a highway ramp in Orlando, Florida.

In a recent OSHA investigation, two Florida construction contractors were cited for serious safety violations. The decision followed an incident during a crane operation on a highway ramp in Orlando, Florida, resulting in the death of a 37-year-old worker.

According to a recent release, OSHA revealed that the crane—operated by Adcock Cranes Inc. of Plant City, Florida—tipped over while lifting a 10,700-pound concrete sound barrier panel. An outrigger of the crane failed, causing it to lean and strike an aerial lift operated by an employee of Concrete Impressions of Florida Inc. from Tampa, Florida. The aerial lift was within the crane’s swing radius at the time of the incident.

OSHA's report highlighted that the ground conditions were not adequately assessed to support the crane, leading to a citation against Adcock Cranes and a proposed penalty of $16,131. Concrete Impressions received citations for one serious violation for improper use of extension ladders to access sound barrier panels and another less severe violation related to the lack of required inspection documentation for lifting equipment. The penalties proposed for Concrete Impressions total $4,839.

“The death of any worker is a terrible loss that leaves their family, friends and co-workers devastated. Their pain only worsened when learning the tragedy could have been prevented,” OSHA Area Office Director Erin Sanchez in Orlando said in a statement. “Our investigation found Concrete Impressions and Adcock Cranes failed in their responsibilities to provide employees with a safe work environment.”

Both companies have 15 business days from receipt of their citations to comply, request an informal conference or contest the findings before an independent commission.

About the Author

Robert Yaniz Jr. is the Content Editor of Occupational Health & Safety.

Product Showcase

  • EMSL Analytical, Inc. - Air Sampling Supplies & Testing Labs

    EMSL Analytical, Inc. operates laboratories throughout the United States and Canada. EMSL is a nationally recognized and locally focused provider specializing in fast laboratory results for Asbestos, Mold, Silica, Lead & Metals, Bacteria, Legionella, USP , Combustion By-Products, VOC’s, Radon, PCB’s, Formaldehyde, METH/Fentanyl, Identification of Dust & Unknowns. Sampling Pumps, Cassettes, Media & Supplies available. Reach us at 1-800.220.3675 3

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. 3

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! 3

Featured

Webinars