OSHA Identifies Safety Violations at 2 Florida Construction Contractors

OSHA Identifies Safety Violations at Florida Construction Contractors

The crane safety failures led to a fatal incident on a highway ramp in Orlando, Florida.

In a recent OSHA investigation, two Florida construction contractors were cited for serious safety violations. The decision followed an incident during a crane operation on a highway ramp in Orlando, Florida, resulting in the death of a 37-year-old worker.

According to a recent release, OSHA revealed that the crane—operated by Adcock Cranes Inc. of Plant City, Florida—tipped over while lifting a 10,700-pound concrete sound barrier panel. An outrigger of the crane failed, causing it to lean and strike an aerial lift operated by an employee of Concrete Impressions of Florida Inc. from Tampa, Florida. The aerial lift was within the crane’s swing radius at the time of the incident.

OSHA's report highlighted that the ground conditions were not adequately assessed to support the crane, leading to a citation against Adcock Cranes and a proposed penalty of $16,131. Concrete Impressions received citations for one serious violation for improper use of extension ladders to access sound barrier panels and another less severe violation related to the lack of required inspection documentation for lifting equipment. The penalties proposed for Concrete Impressions total $4,839.

“The death of any worker is a terrible loss that leaves their family, friends and co-workers devastated. Their pain only worsened when learning the tragedy could have been prevented,” OSHA Area Office Director Erin Sanchez in Orlando said in a statement. “Our investigation found Concrete Impressions and Adcock Cranes failed in their responsibilities to provide employees with a safe work environment.”

Both companies have 15 business days from receipt of their citations to comply, request an informal conference or contest the findings before an independent commission.

About the Author

Robert Yaniz Jr. is the Content Editor of Occupational Health & Safety.

Product Showcase

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. 3

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. 3

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. 3

Featured