OSHA Cites South Florida Contractors for Neglecting Fall Protection Standards

OSHA Cites South Florida Contractors for Neglecting Fall Protection Standards

Two contractors face $174,000 in penalties for safety violations.

Two South Florida contractors are confronting nearly $174,000 in penalties after an OSHA investigation identified compromised safety conditions affecting 12 roofing workers.

According to a release dated Oct. 6, OSHA’s investigation revealed that both A1A Roofing Contractor LLC and Paul Bange Roofing Inc. overlooked critical fall protection standards. The agency observed the violations during a visit to a worksite in Davie, FL in April 2023.

Inspectors discovered workers from Loxahatchee-based subcontractor A1A Roofing were performing tasks on pitched roofs up to 32 feet high without proper fall protection measures in place. Another worker used a broken harness, and the company failed to provide fall protection training to the employees. A1A Roofing faced similar OSHA citations in September 2022.

Meanwhile, Davie-based Paul Bange Roofing Inc.—the primary contractor—neglected to conduct regular inspections, as required by law to prevent potential fall hazards. Overall, A1A Roofing faces two willful violations, one repeat violation, three serious violation and $163,044 in proposed penalties. Paul Bange Roofing received one serious citation and $10,938 in fines.

“Our inspectors found the primary contractor and subcontractor at a Davie work site failing to protect workers from the risks of falls from elevation, the construction industry’s leading cause of death,” OSHA Area Office Director Condell Eastmond in Fort Lauderdale said in a statement. “Fall dangers are widely known in the roofing industry as are the protections that employers must legally use to prevent them, so neither A1A Roofing nor Paul Bange Roofing have a valid excuse for putting their workers in jeopardy of serious or fatal injuries.” 

A1A Roofing Contractor LLC and Paul Bange Roofing Inc. both now have 15 business days to either comply with the penalties, seek an informal conference with OSHA or contest the agency’s findings before the independent Occupational Safety and Health Review Commission.

About the Author

Robert Yaniz Jr. is the Content Editor of Occupational Health & Safety.

Product Showcase

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. 3

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm 3

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! 3

Featured