Legionella Management: Back to Basics

Legionella Management: Back to Basics

This article outlines the basics of legionella management, legionella risk assessments, legionella training and competence for any organization and governance with a focus on the UK.

It is very important to ensure you understand exactly what needs to be done on your site to ensure compliance with guidance, as a minimum; if there are any areas of ambiguity these should be resolved as soon as possible.

Legionnaires’ Disease is considered a preventable disease because we inadvertently design and build systems that may facilitate the growth of Legionella bacteria to a level that represents a risk to public health. It is therefore the landlord/duty holder’s responsibility to ensure that the property/properties under their control are suitably managed to mitigate Legionella risk—as far as reasonably practicable.

If you are using a water hygiene company in the UK, ask yourself if they are a member of the Legionella Control Association. Membership requires an organization to provide a commitment to ensure that all clients are aware of their obligations under ACoP L8HSG274 and any other applicable guidance, such as (S)HTM 04-01or (S)HTM 01-05 safe water in healthcare premises, which provides the basis for all controls you may require.

Legionella Risk Assessment

A Legionella risk assessment for your property should be carried out to identify the assets on site and the required pre-planned maintenance. Once the schedule of pre-planned maintenance tasks begins, the findings should be reviewed and actions taken if the results fall outside the recommended ranges.

From this, you have a responsibility to produce a clear and concise written scheme of control (part of your Water Safety Plan). If you employ Water Treatment/Water Hygiene companies as service providers to help you deliver part of the work, they too should be named in this document.

It is important to note that in the UK, the two-year frequency for carrying out a new risk assessment was removed from ACoP L8 in 2013, however, this doesn’t mean that the assessment is a finished document as regular risk assessment reviews should be undertaken by competent personnel routinely to ensure continued compliance and if established these should be discussed by your Water Safety Group.

Legionella Training

Duty holders have the responsibility to keep a safe estate to adequately protect occupants from waterborne pathogens such as Legionella and opportunistic pathogens. Failure to do so is likely to result in prosecution depending upon the extent of non-compliances/water management failings that have been identified.

Regular training of staff, both internal and external, is an important aspect of maintaining control and should be routinely reviewed and be appropriate for the role they are undertaking. There are many Legionella training courses available, specific to each role within water safety, including ones on the risks for all staff and ones for maintenance personnel, maintenance managers/supervisors and senior managers.

Assessing Competency

One of the key responsibilities of a duty holder is to fully understand how to ensure that estate operational/technical plans are suitable and sufficient and fit for purpose. These are required to address Legionella risk associated with the property/estate they are responsible for.

If however, the duty holder does not have the required competencies to enable them to design, implement and update these technical plans, referred to as a written scheme, then this authority/responsibility may be devolved to a nominated competent person within the organization. This person must be formally appointed in writing by the duty holder as is often referred to as the Responsible Person for Water (RP[W]).

Defining “competence” is therefore critical and of significant importance to maintain control and ensure that the person has the skills, knowledge, attitude, training and experience to deliver the role competently.

The Health and Safety Executive (HSE) describe competence as “the combination of training, skills, experience and knowledge that a person has and their ability to perform a task safely,” so competence in health and safety should be seen as an important part of “workplace activities” rather than an add-on or afterthought.

Therefore, when identifying a “competent person” for water management, that person should take a holistic approach to all associated health and safety. This requires continuous improvement, which includes undertaking and completing relevant competency-based water hygiene Legionella training and appraisals. This approach will help to ensure the smooth operation of the property/properties under their control.

Failure to formally appoint an appropriately trained individual(s) is likely to be non-compliant which will present a potential risk of harm to service users, contractors and the general public/users of the property/properties under their control. This could lead to legal action being taken against an organization.

Product Showcase

  • EMSL Analytical, Inc. - Air Sampling Supplies & Testing Labs

    EMSL Analytical, Inc. operates laboratories throughout the United States and Canada. EMSL is a nationally recognized and locally focused provider specializing in fast laboratory results for Asbestos, Mold, Silica, Lead & Metals, Bacteria, Legionella, USP , Combustion By-Products, VOC’s, Radon, PCB’s, Formaldehyde, METH/Fentanyl, Identification of Dust & Unknowns. Sampling Pumps, Cassettes, Media & Supplies available. Reach us at 1-800.220.3675 3

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! 3

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. 3

Featured

Webinars