Protecting Workers from Trench Collapses

Protecting Workers from Trench Collapses

More than 370 workers lost their lives to trench-related incidents from 2003 to 2017.

Trench-related deaths were on the rise in the first six months of 2022. Twenty-two workers died from trenching and excavation-related incidents in this time frame. In 2021, only 15 workers died the entire year.

From 2003 to 2017, 373 workers lost their lives to trench-related incidents, according to the National Institute for Occupational Safety and Health (NIOSH).

Working in a trench presents many hazards for workers, including trench collapses. NIOSH sums up the dangers of trench collapses in two simple sentences: “A small amount of dirt may not seem dangerous, but one square yard can weigh more than 3,000 pounds—the weight of a compact car. This small amount of dirt is enough to fatally crush and suffocate workers.”

How can employers keep workers safe from these collapses? OSHA provides these recommendations.

  1. Workers must have a way to enter and exit the trench safely.
  2. For cave-in protection, remember the slogan Slope It. Shore It. Shield It. “SLOPE or bench trench walls, SHORE trench walls with supports, or SHIELD trench walls with trench boxes,” OSHA said.
  3. No materials or heavy equipment should be near the edge of the trench. At a minimum, materials must be two feet away from the edge, OSHA said.
  4. Trenches should not have water in them. OSHA recommends watching out for this and other environmental hazards.
  5. Trenches must be inspected every day by a competent person. Workers should not enter a trench if it hasn’t been inspected.

Employers should also be sure to review and follow state and federal OSHA standards for trenching in their industry.

OSHA has additional resources on overall trench safety, including an On-Site Consultation Program for eligible businesses, a trenching and excavation webpage and a safety video.

"In a matter of seconds, workers can be crushed and buried under thousands of pounds of soil and rocks in an unsafe trench. The alarming increase in the number of workers needlessly dying and suffering serious injuries in trenching incidents must be stopped,” said Assistant Secretary for Occupational Safety and Health Doug Parker in a July news release. "There simply is no excuse for ignoring safety requirements to prevent trench collapses and cave-ins, and leaving families, friends and co-workers to grieve when the solutions are so well-understood."

Photo credit: BY-_-BY / Shutterstock.com

About the Author

Alex Saurman is a former Content Editor for Occupational Health & Safety,who has since joined OH&S’s client services team. She continues to work closely with OH&S’s editorial team and contributes to the magazine.

Product Showcase

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

Featured