How to Prevent Slip, Trip and Fall Accidents

How to Prevent Slip, Trip and Fall Accidents

These incidents injure thousands of workers every year.

Falls are the second leading cause of unintentional death in the United States and the most common cause of traumatic brain injuries (CDC). While not all falls are fatal, and many don’t cause any harm, one in five falls results in severe injuries such as broken bones or head trauma. In 2020, 805 people died at work due to a fall, and 211,640 received injuries bad enough to require days away from work (NSC). Employers that are serious about protecting their workers and their company must take proactive steps to prevent slip, trip, and fall accidents in the workplace.

The Mechanics of Slip, Trip and Fall Accidents

There are three things involved in slips, trips, and falls—friction, momentum, and gravity. Your center of gravity is the point where the weight of your body is evenly distributed. Imagine yourself standing up straight with your feet shoulder width apart. Now imagine three points, one on each foot and one on your lower back, forming a triangle. If the point on your lower back—your center of gravity—extends past either of the lower two points, you can lose your balance and fall.

The shape and size of your body determines your center of gravity. Shorter people have an easier time maintaining their balance due to a lower center of gravity. In contrast, taller people are less stable, and it takes less force to move their center of gravity past their feet. When you walk, your center of gravity shifts, and for a brief moment, you become off-balance. If you are unlucky enough to encounter a slip or trip hazard at that moment, you are likely to fall.

A slip occurs when there isn't enough friction between your feet and the walking surface, like slipping on a greasy floor or an icy sidewalk. A trip is when your foot or lower leg comes in contact with something unexpectedly and stops, or you step down to a lower level and your momentum continues to move your body forward.

We’ve all likely tripped on a door threshold or unexpectedly stepped off of a curb and lost our balance. Most people only lift their foot about half an inch off the ground with every step, which means anything half an inch or taller could potentially trip them. Things like uneven surfaces, tools, floor mats, or power cords can all cause a fall.

There are two types of falls—falls to the same level and falls to a lower level. You don’t have to fall far to be seriously injured; 136 of the 805-workplace slip, trip, and fall deaths in 2020, fell to the same level (NSC). According to a 2019 U.S. Bureau of Labor Statistics report, falls on the same level was the second leading workplace injury resulting in days away from work. You don’t have to slip or trip to have a fall either. Anytime your center of gravity extends past your feet, like overextending yourself while reaching for something while on a ladder, you could likely fall.

Who is Most Likely to be Involved in a Slip, Trip and Fall ccident

Construction workers are more than seven times as likely to be involved in a fall accident than other industries, and 37.9 percent of all fatalities within construction were from falls (BLS). While the construction industry is the most affected, no industry is immune to slip, trip, and fall accidents.

Recent research from Atlas Injury Prevention Solutions (IPS) identified a trend in slip, trip, and fall accidents among several of its clients. “One of our manufacturing partners were seeing a high rate of slips trips and falls, especially since coming back from the pandemic shutdown” says Curt DeWeese, Director at Atlas IPS. “Already providing onsite early intervention services gave Atlas the ability to pilot an incident program across multiple locations and dive into the causes of this troubling rise in cases.” During the accident investigation process, a significant portion of the injured employees were older workers and selected “I didn’t see it” or “I just lost my balance” as the reason for their injuries. This trend is possibly due to the physical, cognitive, and sensory decline associated with the aging process. “This touch point with the affected employee allowed our onsite providers to explore if there were any underlining health concerns due to age or de-conditioning we needed to address,” says DeWeese.

This research aligns with other data from the World Health Organization. WHO has identified age as one of the most significant contributors to falls, and that risk continues to increase with age. In fact, fall death rates amongst older adults in the United States increased by 30 percent between 2007 and 2016, according to the CDC. The trend is unsettling, and steps must be taken to protect these at risk employees. 

Preventing Slip, Trip and Fall Accidents in the Workplace

Providing employees with safety training is one of the most effective ways to create a safer working environment. Train your employees to spot slip, trip, and fall hazards, like clutter, protruding objects, and wet conditions; never assume they already know.

Supplying the right PPE is the responsibility of every employer, but OSHA may not mandate some items. However, just because the government doesn’t force you to purchase a particular type of PPE doesn’t mean it is not a good business decision. Besides pain and suffering, accidents also cost a lot of money. If you have employees working in slippery environments, providing high-quality non-slip shoes or boots will likely pay for themselves in the long run.

Poor housekeeping is one of the leading causes of slip, trip, and fall accidents. Yet, the cleanliness and organization of a work area is a commonly neglected part of workplace safety. These types of hazards often go weeks or months without being fixed. Combat the issue by making housekeeping and hazard identification everyone's responsibilities. The more you empower your employees to identify and fix hazards, the safer your workplace will become.

Finally, make sure you have a plan for handling accidents if they do occur. The goal of any accident investigation should be to determine why it happened and what steps to take to prevent it from happening again. Developing standard protocols will allow you to collect consistent data and ask the right questions making trends more noticeable and root causes easier to identify. Post-accident physical assessments can also help to prevent reoccurrence by identifying risk factors amongst your workers to mitigate future concerns.

While slip, trip, and fall injuries are common, they are also preventable. By implementing these tips, you will be on your way to creating a safer workplace.

Product Showcase

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. Read More

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit for more information. Read More

  • Safety Shower Test Cart

    The Safety Shower Test Cart speeds up and simplifies emergency shower tests, ensures you stay in compliance with OSHA regulations, and significantly reduces testing costs. With 7 unique features, the cart makes testing easy, effective, and efficient. You can test water clarity, flow, temperature, and spread—all at the same time! Most safety shower testing kits create a mess, take too much time to use, and don't fully help you stay in compliance with OSHA & ANSI standards. Transform the way you test emergency showers with Green Gobbler Safety. Read More


Artificial Intelligence