This photo shows samples of rebar recovered from the collapsed FIU pedestrian bridge before they were sent to the Federal Highway Administration

NTSB Reports Design Errors Made in FIU Pedestrian Bridge

Six people died and eight others were injured when the 174-foot bridge collapsed on March 15, 2018, while it was still under construction.

An investigative update issued Nov. 15 by the National Transportation Safety Board Thursday says errors were made in the design of the Florida International University pedestrian bridge that collapsed in Miami on March 15, 2018, and that cracking observed prior to the collapse is consistent with those errors. Six people died and eight others were injured when the 174-foot bridge collapsed. Eight vehicles were crushed in the collapse, with seven of those vehicles being occupied at the time.

The bridge was still under construction when it fell. The new update says design errors made were in the design of the northernmost nodal region of the span where two truss members were connected to the bridge deck, and that the errors "resulted in (1) overestimation of the capacity (resistance) of a critical section through the node comprised of diagonal member 11 and vertical member 12, and (2) apparent underestimation of the demand (load) on that same critical section."

The design review was conducted by the Federal Highway Administration's Office of Bridges and Structures in support of NTSB's ongoing investigation of the collapse. The Federal Highway Administration is a party to the investigation.

The Turner-Fairbank Highway Research Center in McLean, Va., conducted numerous tests and examinations of concrete and steel samples taken from the fallen bridge. The concrete and steel specimens tested by Turner-Fairbank Highway Research Center personnel met the minimum requirements specified in the project's build plans, the update says, adding that concrete core specimens from the bridge deck and bridge canopy met the compression requirements in the project plans.

(The photo in this story shows samples of rebar recovered from the collapsed pedestrian bridge before they were sent to FHWA's Turner-Fairbank Highway Research Center, where the samples underwent materials testing as part of the investigation. NTSB photo by Adrienne Lamm)

On the university's website, a news story about the update quoted FIU Senior Vice President for Finance and Administration and Chief Financial Officer Kenneth Jessell: "At FIU, we continue to fully cooperate with the NTSB so that it may finish its investigation and complete a final report and safety recommendations. We hope the results of the investigation will help bring closure to the families and loved ones of the victims."

Product Showcase

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. Read More

  • HAZ LO HEADLAMPS

    With alkaline or rechargeable options, these safety rated, Class 1, Div. 1 Headlamps provide long runtime with both spot and flood options in the same light. Work safely and avoid trip hazards with flexible hands-free lighting from Streamlight. Read More

  • Kestrel 5400 Heat Stress Tracker WBGT Monitoring for Workplace Safety

    Ensure safety with the Kestrel® 5400 Heat Stress Tracker, the go-to choice for safety professionals and endorsed by the Heat Safety & Performance Coalition. This robust, waterless WBGT meter is ideal for both indoor and outdoor environments, offering advanced monitoring and data logging essential for OSHA compliance. It features pre-programmed ACGIH guidelines and alert settings to quickly signal critical conditions. Integrated with the cloud-based Ambient Weather Network, the 5400 allows managers to view, track, and log job site conditions remotely, ensuring constant awareness of potential hazards. Its capability for real-time mobile alerts and remote data access promotes proactive safety management and workplace protection, solidifying its role as a crucial tool in industrial hygiene. Read More

Featured

Artificial Intelligence