Energy Department Cites Bechtel National Inc. for Safety Violations

BNI has been cited for violations in the areas of management responsibilities, hazard identification and assessment, hazard prevention and abatement, training and information, and recordkeeping.

The U.S. Department of Energy has issued a Preliminary Notice of Violation to Bechtel National Inc. for violations of worker safety and health requirements. The federal agency said the violations stem from an event when a worker was injured Nov. 4, 2016, when a 12-inch pipe joint separated and released a pressurized stream of water during preparation of a piping system for pressure testing at the Waste Treatment and Immobilization Plant at the Hanford Site.

The notice cites three Severity Level I violations and two Severity Level II violations of requirements enforceable under 10 C.F.R. Part 851, Worker Safety and Health Program. BNI has been cited for violations in the areas of management responsibilities, hazard identification and assessment, hazard prevention and abatement, training and information, and recordkeeping.

DOE's announcement said because it withheld $556,500 in contract fees for significant failures in safety and health performance, including the matters associated with this notice, it proposes no civil penalty for the identified violations.

BNI is the management and operating contractor for the Hanford Waste Treatment and Immobilization Plant Project at the Hanford Site located in Richland, Wash.

Product Showcase

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. Read More

  • AirChek Connect Sampling Pump

    Stay connected to your sampling with the SKC AirChek® Connect Sampling Pump! With its Bluetooth connection to PC and mobile devices, you can monitor AirChek Connect pump operation without disrupting workflow. SKC designed AirChek Connect specifically for all OEHS professionals to ensure accurate, reliable flows from 5 to 5000 ml/min and extreme ease of use. AirChek Connect offers easy touch screen operation and flexibility. It is quality built to serve you and the workers you protect. Ask about special pricing and a demo at AIHA Connect Booth 1003. Read More

Featured

Artificial Intelligence